What is the car wash process in the car wash shop?

1, pick up the car, and the customer will hand in the key to pick up the car; 2. Drive to the car wash and close the doors and windows, side windows and skylights;

3. Automatic high-pressure car washer cleans the whole car to remove the sand and sludge in the car;

4. Foam on the car washer;

5. The car washer should scrub from top to bottom until the whole body is clean, and there is no dirt or water mark;

6. Automatic high-pressure car washer cleans the whole car to remove traces of foam and dirt;

7. Car Wash Machine Wash the whole car and corner parts (cleaner) with a high-pressure car wash machine;

8. Driving on the turntable;

9, spraying, this process should cover a large towel on the front windshield to prevent the fog from spraying directly on the front windshield;

10, drive to the car wash area;

1 1. Wipe the inner front windshield with a towel placed in the disinfection cabinet, and brush the air conditioner and side seams with a small brush;

12, blow dry the whole vehicle, and blow off the corner mud with an air gun;

13, machine maintenance check tire pressure, check engine oil and glass water;

14, take out the plastic pad and wash it;

15, blowing dust in the inner chamber;

16, put a safety mat at the boarding place;

17, the customer picked up the car, thank you for coming.

Every process of car washing follows the top-down principle, including the roof, front and rear windshields, front and rear cover plates, body windows and sides, lights, bumpers, skirts and wheels.

Note: car washing is not only a physical labor, but also a method. The first thing to note is that whether you are going to wash the car or do it yourself, you should clean the hood after the car has completely cooled down. Especially in summer, don't clean the car in strong sunlight, which will lead to premature aging of the car engine.

Million car purchase subsidy