Water heater water is very hot temperature can not adjust down?

1, when the user found the water heater water is too hot, it may be too low water pressure, small water flow or water pipe plugged. 2, it may also be too high gas pressure appeared too much water heater water too problem. 3, it may be improperly set, because the water heater is set in the high temperature area when it is very hot, and every model of water heater is not the same, so the improper use of the water heater can lead to such a situation.

/Solution:

1, when the water heater temperature is too high, if the water pressure is low water flow is small and water pipe clogging consists of, then the user can change the water pipe to a certain caliber, and then install a booster pump, clean up the water inside the water heater limescale and clogging, and then adjust the water regulator button on the water heater to adjust the water to the maximum, and finally adjust the adjust the shower, adjust the shower to the maximum.

2, if the gas pressure is too high, then the user needs to change the liquefied pressure reducing valve, the gas pressure modulation to the basic requirements of the value, the operation of this time, the user can seek some professional help.

3, if it is not set properly, the user can turn over the manual, the hot water heater set the high temperature area to a correct place can be.

4, plug the nozzle then need to be slightly more experienced users, because this needs to be dismantled, you need to plug the nozzle with tin foil, and then specifically plug a few according to the actual situation, pay attention to not to plug the nozzle of the ignition position, otherwise it will not be able to hit the fire, after the change to remember to try to leak no gas leakage.