A good pair of ski boots plays a great role in skiing, so how are ski boots made?

Nowadays, ski boots effectively transfer body movements to skis, especially when you want to improve your skiing skills to a higher level. Ski boots are also a vital part.

First of all, in order to transform these plastic fragments into high-tech ski boots, we should start with computer design to simulate the melting process of the fragments and the molding process of the model. Just like a computer model, it only takes a few seconds to turn plastic fragments into the shell of ski boots. The machine aligns the shoe type with the mold, and the mold will be embedded with a pressure of 500 tons. Then, the melted fragments will be shot into the space between the mold and the shoe shape, and the plastic will harden immediately. The mechanical arm will pull the new snow boot shell out of the shoe shape. Two different plastics are used here at the same time, which makes the shell more distinctive.

Secondly, now machines and equipment are printed with brand names and patterns on the shell, and assemblers attach rubber sheaths to the soles with rivets, which will connect the fixing devices of snowboards with each other and make it safer for skiers to walk at rest. The shell of this ski boot has been made and the buckle is locked. The position of the lock catch has been marked with grooves in the wood forming process, which can guide the assembler to fix the lock catch on the boots with rivets. At the same time, another worker handled foreign aid with plastic boots. First of all, the edges are cut to ensure that the shell is smooth and flat, and a signal reflector is installed inside to find skiers during avalanches, which is a function that can be seen in advanced styles. Stick a long belt on the back, so that skiers can adjust the position of ski boots on their calves.

Third, now stick the snow bucket on the shell. This fastener is adjustable to match the skier's leg shape, so that the boot shell is completed. Next, make the inner layer. Even if the pattern is loaded into the computer, the kitchen knives will be arranged reasonably to reduce waste. The computer just cuts the knife and cuts out the shape of the inner layer. The material of the inner layer combines a variety of synthetic fibers, so that the inner layer of the boot can isolate the skier from the cold and humidifier.

Fourth, sew the outer layer, and then bond the two layers together. The outer fabric and the inner liner are made of polyurethane. This special device uses pressure to shape the glued cloth and then sends it to the sewing department for sewing. Glue seams are not sewn with waterproof cloth, which is a special material to avoid lining shoes. Slide the robot arm and then open the boots for the assembler to put the inner layer. Go inside. Once the inner layer is assembled, this pair of ski boots is made. Although the manufacturing process only took an hour, these boots should be able to ski in the snow in the next few years.