The remote control of the easy to come bath heater does not pair up

In most cases, the battery is used for a long time, resulting in the normal power supply, at this time you just need to replace the battery can be solved. Of course, it is also possible that the remote control has not been used for a long time, resulting in rusty springs in the battery compartment, you need to clean up the rust before installing batteries. If it still doesn't work, you can only find the after-sales service of the product.

What is the reason for the bath remote malfunction

The bath remote malfunction, usually the receiver inside is bad, at this time you just need to replace a new one on the line. The main reason is that the bathroom has more water vapor, so the possibility of bad is also higher.

What are the precautions for the use of the remote control

1. As the remote control belongs to the low-consumption products, usually, the battery life is six months, if it is not used properly, then the battery life will be greatly shortened. In addition, when you replace the new battery, you should all change together, do not mix the old and new batteries or different types of batteries.

2. If your battery is leaking, then you need to clean the battery compartment before replacing it with a new one. To prevent leakage, it's best to remove the battery and store it away when it's not in use for a long period of time.

3. Finally, it is important to make sure that your bath receiver is working properly for the remote control to be effective. In addition, make sure the remote control is good. First of all, open the shell of the remote control, and then find the remote control receiver, and check whether the plug is loose, and then use alcohol to wipe the dust in the receiver, and finally in the try if you can. If it does not work, replace the remote control receiver with a new one.