How to make waterbed incubation

Temperature controller, heating pad, box, plastic bag.

Method:

1. Prepare materials, plastic bags, foam boxes, thermostats and heating pads.

2. Put the heating pad under the foam box, and you can use the carton without the foam box. The thermal insulation effect of cartons is not good, and the temperature of cartons will drop rapidly after power failure.

3, plastic bags filled with water on the heating pad, the water temperature is about 38 degrees, or directly with cold water. Plastic bags can't find a suitable fresh-keeping bag, so we should put more layers to ensure that they don't leak when hatching.

4. Insert the heating pad into the thermostat, put the probe of the thermostat on the water bag, and set the specified temperature of the thermostat. For example, if the hatching temperature of quail eggs is between 37, 8 and 39 degrees, it is set to be powered on at 37, 8 degrees and powered off at 39 degrees. If some thermostats are not accurate to 0. 1 degree, set them to 38 degrees.

5. After setting, put the egg on the water bag and find something to cover it. When the temperature controller probe detects that the temperature is lower than the set temperature, it will be electrified and the heating pad will start heating. The water bag is full of cold water. Water can be heated to 38 degrees only by the temperature of the heating pad, which takes half a day or more.