The correct method of fishing and throwing rod

The correct throwing method is as follows:

1, side throw method

This is the most common hook throwing method, which is usually used in windy conditions. The trick is to hold the plumb pendant or string with your left hand, put the bait on one side of your body, gently hold the pole handle with your right hand, and roll your body from the left side with your body as the axis, so that your right arm will naturally swing the pole upward.

Fly as close to the surface of the water as possible with the lead pendant and hook bait to ensure accurate and light swing in front of the fishing point. The accuracy of hook throwing is directly affected by the villain of the swing bar and the correct posture of rollover.

2. Swing throwing method

Swing-and-throw method is a hook-and-throw method that swings the bait to the fishing point like a swing. In the absence of wind and breeze, this kind of hook throwing method is often used: the trick is to hold the rod shoulder-high with the right hand, the tip of the rod points to the fishing point, and the left hand is pinched wrongly, so that the hook bait is naturally hung in front of the angler, and then the right arm is raised, and the hook bait is quietly thrown to the accurate fishing point.

The bait and lead fall into the water first, and then the buoy falls into the same landing point as the fishing drop. This method is simple, convenient and practical because there is no loop bamboo pull back.

3. Back throwing method

When the wind is strong, the backward leaning method is generally used. The trick is to throw the hook and bait directly behind your body. When a position is drawn, throw it forward hard behind the mountain, just like waving a whip when driving a carriage. When the fishing rod moves forward, the hook, bait and lead pendant are forced to the fishing point.

This series of movements needs to be clean and neat. This hook throwing method is generally not used, because the bait is required to be hard or sticky when throwing. When the wind is around 4 or 5, other throwing methods are useless, so this method must be adopted.

Usage of float for rod throwing

1, select the correct floating-point number.

It is people's eyes that float. The choice of floats is generally to catch small fish with small floats, big fish with big floats, shallow water with small floats and deep water with big floats. However, because there are many kinds of floats, and each one adapts to different fish conditions, it needs to be tested many times by itself or introduced by others to make a good choice.

2. Floating adjustment

First, don't hang the string, then hang heavy lead through the lead seat. The weight of lead is greater than the buoyancy of the float, so that the float is completely submerged in the water. Finally, the float is gradually pulled up to the water surface, so that the height of the float can be adjusted by pulling out the height of the water surface.

Step 3: Adjust your eyes

After putting the float into the water, gradually cut the wire until the required mesh is exposed. The basic setting methods are: 7-mesh soft tail floating rubbing (adjust 4-5 to catch 2 meshes), 7-mesh soft tail floating bait (adjust 3-4 to catch 2 meshes), hard thin tail rubbing bait (adjust 7-9 to catch 2-3 meshes) and hard thin tail pulling bait (adjust 5-7 meshes).

Step 4 Find the bottom exactly

After hanging the parting line, we move the float, adjust the distance between the float position and the positioned position of the upper space bean, then hook and rub the bait and hang a big bait ball to find the bottom, so that the float is out of the water for 2 meshes, and finally continue to pull the float for about 2 cm. If the float shows more than 3 meshes, it means that it has passed the bottom, and the float is pulled back to 2 cm. Then hang a bait ball of normal fishing size and throw it into the water, and fine-tune the float to about 2 meshes of the fishing net for trial fishing.

5. Adjust the float during the trial fishing.

If the bait has a mouth, but no fish can be caught, it means that the fish is too smart to catch, and the float is 2 cm higher. If the fish's mouth is on its mouth or chin, it is too blunt to fish. Pull up the float 1 cm at a time. If there is no fish mouth at the bottom, pull down the float at this time and find the water layer where the fish is.