What is a partition wall?

Let you know how to make partition walls

What is a partition wall?

Everyone should be curious, but everyone who knows about screens, TV cabinets, etc. will know very well.

Partition walls are visually divided by lines and blocks to create simple, concise, layered, transparent and flexible humanized interior spaces.

The following is the editor’s introduction to partition walls.

What is a partition wall?

Understanding Partition Walls First, let’s discuss wall materials.

Since the main function of a dividing wall is to isolate spaces, it cannot be rendered thick.

The thinner the better, it does not take up limited space and can also reduce the load on the floor.

Therefore, the traditional concept of clay bricks is not suitable for walls.

So considering the thickness, stability, and sound insulation and waterproofing requirements, which materials are better?

What is a partition wall?

Understand that the most common materials for partition walls are light steel keels and gypsum boards.

It is first framed using light steel joists and then sealed with plasterboard.

Covering material is then added to the exterior of the drywall.

Generally speaking, the covering materials are mainly plywood, fiberboard, veneer fireproof board, thin skin, etc.

Among them, fireproof board and thin skin are the most ideal materials.

Secondly, there are glass tiles, which are the most common in offices.

This glass brick is made by melting two pieces of glass together.

This kind of glass partition wall choice can meet the requirements of large-area lighting and is most suitable for public places, but it is relatively expensive.

Finally, there are screens and bead curtains, which are relatively affordable and cheap and can be used in home design for pure isolation and decoration to beautify the space.

Of course, for the selection of indoor walls, we must first clearly check and accept the safety integrity of the building and whether there are any problems, and then communicate with the designer and construction team to clarify the overall design style, determine the wall material and design, and then proceed with construction.

I saw the editor’s introduction, did you suddenly realize it?

The original partition wall looked like this.