Replacement method of common gas stove battery

Ordinary gas stove is a common kitchen equipment in the family, which needs battery ignition. When the battery is out of order or insufficient, it needs to be replaced.

The following methods are used to replace the batteries of ordinary gas stoves:

1. First of all, determine the battery model to be used in the gas stove, which can generally be found in the gas stove manual or battery box.

2. Find the battery compartment usually located under the control panel of the gas stove, and open the battery compartment door by hand or with a screwdriver.

3. To take out the battery, you usually need to gently press the elastic sheet at the bottom of the battery with your finger or screwdriver to eject the battery.

4. Insert the new battery into the battery compartment, and pay attention to the positive and negative directions of the battery, which are usually marked in the battery compartment.

5. Close the battery compartment door and confirm that the battery is installed and sealed.

6. Press the ignition button on the gas stove to test whether the ignition is successful. If the ignition fails, it may be necessary to reinstall the battery or replace it with a new one.

It should be noted that the correct battery model must be used when replacing the battery, otherwise the gas stove may not work normally or cause safety risks. At the same time, in order to avoid battery leakage, it is recommended to replace the battery in time, and do not put the old battery in the gas stove for a long time.