The structural form of the machine tool has a gantry, cantilevered, and what ah, and advantages and disadvantages

Machine tools contain many kinds, you are specifically talking about which kind of machine tool equipment? See what you mentioned above should be gantry planer and so on, if so then there is a moving beam type, fixed beam type.

Comparison of advantages and disadvantages with the traditional gantry planer as follows:

1, the main drive part of the use of high-performance AC servo motors; commutation travel switch, the use of advanced soft switch, to achieve accurate commutation position positioning and excellent commutation stability and very good dynamic performance.

2. The table transmission adopts nine worm gears, which can make the transmission meshing have a high overlapping coefficient and ensure a very large transmission torque and smoothness.

3, the table guideway is glued with PTFE wear-resistant guideway soft belt, due to the small coefficient of friction, greatly extending the service life of the machine tool.

4. The crossbeam adopts super audio quenching process, which makes the service life of the machine longer.

5. Ultra-short stroke can be set, which can make the gantry planer planing within 300mm stroke.

6. The transverse tool travel is driven by servo motor, and the amount of tool travel can be digitally set and the data can be displayed.

7, advanced electronic handwheel tool setting, precise tool setting, save time and labor.

8, electrical PLC control feeding, knife lifting, table deceleration and direction change and beam relaxation, clamping are automatic.