How to disassemble the air conditioner

How to disassemble the air conditioner

How to disassemble the air conditioner? It's very hot in summer. Basically, we live by air conditioning. Without air conditioning, summer will be very difficult. Air conditioning is a very important electrical appliance. For air conditioners, learn how to disassemble and assemble them together.

How to disassemble the air conditioner 1 1? How to disassemble the indoor and outdoor units of air conditioner?

1, before disassembling the air conditioner, the first thing to do is to collect the refrigerant of the air conditioner, which is very important.

2. Next, the indoor machine of the air conditioner was officially dismantled. You can disassemble the outdoor unit first, and at the same time, pay attention to keeping both sides of the machine level to prevent it from falling.

3. Fix the internal machine in the reserved hole, and the two machines should also pay attention to synchronization to prevent water leakage in the later stage of air conditioning.

4. Remove the air conditioning cable and connected pipes. Pay attention to keep the connected copper pipe clean when removing the wire, and keep the nozzle, tee and valve well.

5. Next, disassemble the indoor unit, unscrew the connecting lock nut, then prepare a Phillips screwdriver after the screws are collected, and remove the control line inside the air conditioner. At the same time, the air conditioning panel and filter screen can be removed and placed on the ground.

6. Finally, disassemble the outdoor unit of the air conditioner, open the connecting lock of the outdoor unit, loosen the fixing screws, and finally remove the outdoor unit.

Second, how to install air conditioning

1. When installing the air conditioner, we need to find a suitable location first, and then install the hanging board of the internal unit after confirmation, and it must be installed firmly.

2. Straighten the connecting pipe again and check whether the pipe is bent. Also check the control line, whether there is any problem with the circuit, and connect the pipes properly. Place the outdoor unit, extend the pipe into the room to connect with the indoor cabinet, then hang the indoor unit at the designated position and fix it with a tripod.

Whether removing or installing the air conditioner, it is necessary to pay attention to the synchronization between the indoor unit and the outdoor unit. It is best for two people to remove and install the air conditioner together, so as to ensure the reasonable installation of the air conditioner.

How to disassemble the air conditioner The second step is to avoid hot water in the air conditioner.

Traditional air conditioning cleaning can only simply clean the filter screen and wipe the surface of the evaporator, but it can't completely clean the gap and air supply system of the air conditioning evaporator, and the inside of the evaporator is the place where dust jams are the most serious and bacteria and viruses are the easiest to breed. Select a dry and sunny day and select the air conditioning function key in the box. The present situation of air supply; Run it for 3~4 hours to let the moisture in the air conditioner dissipate, then turn off the air conditioner and unplug the power plug. Clean the dirt on the air conditioner shell with soft dry cloth or warm water, and do not use chemicals such as hot water or flammable engine oil. Take out the clean air filter of the air conditioner, rinse it with clear water or clean the filter screen with a vacuum cleaner, dry it and reinstall it in the air conditioner. Take out the battery of the remote controller and put it in another place to prevent the battery from leaking and corroding the internal components. The remote control must be placed in a dry place, and it should not be squeezed. When cleaning the outdoor unit, rinse the condenser surface of the outdoor unit with clear water, and cover it after drying, so that no water can enter other parts.

Cleaning location: indoor filter screen

There is a lot of dust in the air conditioning filter, which is not only harmful to human body, but also hinders air circulation and reduces refrigeration effect. Rinse the filter with a lot of flowing water, dry it, and then put it back. If there is not much oil on the cover, rinse it with clean water and brush it with a clean soft brush. In order to keep the air fresh during use, it should be cleaned every 15 days. Maintenance tip: clean the filter screen to avoid dust accumulation affecting the next use; Unplug the power plug and take out the battery to prevent accidental damage; Before using the air-conditioning cover, dry the machine body to avoid the condensed water staying in the machine for too long to breed bacteria. If the house or machine is moved, it must be carried out by professionals to prevent refrigerant leakage and damage to the air conditioner due to wrong power cord connection.

Tip: The air conditioner purchased has the service phone number of the manufacturer on the warranty card. Users can only clean the surface and filter screen of the indoor unit, and the internal cleaning is carried out by after-sales personnel.

Deep cleaning of air conditioner can prevent bacteria.

As the saying goes, bacteria are everywhere. Will the air conditioner be cleaned after it has been idle for a long time? As the weather gets hotter, the time to leave the air conditioner is getting closer and closer. Relevant experts remind the public that deep cleaning should be carried out before turning on the air conditioner to prevent bacteria and viruses from multiplying. According to reports, the traditional air-conditioning cleaning can only simply clean the filter screen and wipe the surface of the evaporator, but it can't completely clean the gap and air supply system of the air-conditioning evaporator, and the inside of the evaporator is the place where dust is the most serious and bacteria and viruses are the easiest to breed.

In this regard, China Household Electrical Appliances Maintenance Association recently issued the Technical Specification for Deep Cleaning of Household Air Conditioners, which requires the cleaning of electrical appliances such as air conditioners to be standardized. It is understood that the relevant air-conditioning deep cleaning service certification is expected to be launched this year. The deep cleaning of air conditioners requires professional equipment and usually needs to be sent to a professional maintenance office. However, we can also choose to do general deep cleaning. The specific method is to choose a dry sunny day, and select the function key of the air conditioner to run for 3-4 hours under the condition of air supply, so that the moisture in the air conditioner can be exhausted. Then turn off the air conditioner, unplug the power plug, wipe off the dirt on the air conditioner shell with a soft dry cloth, or scrub it with warm water, but never scrub it with hot water or combustible oil. At the same time, take out the filter screen of the air conditioner, rinse it with clear water or clean it with a vacuum cleaner, dry it and reinstall it in the air conditioner. When cleaning the outdoor unit, rinse the condenser surface of the outdoor unit with clear water, and cover it after drying, so that no water can enter other parts. If you wash it with clear water, soak it with peracetic acid in a proper proportion, and then wash it with clear water, the effect will be better.