Fishing is inseparable from fishing rod. Do you know how to maintain a fishing rod?

First, how to maintain the fishing rod 1

Add grease. When contacting the rod body joint, take a small amount of grease and wipe it at the joint to make it naturally slide into the fishing rod joint. Then wait for three or five minutes, and then gently rotate the left and right rods to complete the joint exit.

Fishing rod maintenance II

Wear rubber gloves with both hands, or increase the friction by using the joint withdrawal device, hold the left and right joints tightly at the joints and twist them gently; When the rod body is wet or the friction force is insufficient when holding the rod with both hands, rubber gloves can be worn to improve the friction force and increase the rotating force. Don't use too much force when operating, and try to make the force symmetrical when rotating the force.

Fishing rod maintenance 3

Wrap the towel around the bottom of the pole and clamp it. Then, erect the pole firmly, with the handle facing down, lift it to a certain height to let the pole fall, and poke the ground at will, which can be repeated several times. First, the towel is used to protect the fishing rod from being damaged, and then the fishing rod is untied by gravity and recoil force transmitted back to the rod body.

Fishing rod maintenance 4

Soak the towel in boiling water and apply it to the joint for a period of time, or pour it on the joint with boiling water, and extract the joint by applying the principle of heat expansion and cold contraction; I believe everyone knows that hot towels will expand at the joint of the rod after being applied to the rod body for a period of time.

Second, the fishing rod maintenance guide book 1, wipe the fishing rod and dry it after each fishing.

After fishing, the dirt, mud and gravel in the rod body must be wiped clean in the fishing field. When you get home, pull out any section of the fishing rod, clean it, dry it and reassemble it, then store it in the fishing rod bag and do the most basic fishing gear maintenance.

2. Telescope the fishing rod according to the instructions.

After the sections of the common vibrating fishing rod are pulled out in place, we should rotate the left and right sections up and down slightly to lock them. The same is true when retiring. First, gently reverse the force with your hands, and then retract the fishing rod.

3. Don't use violence to return fish or pull rod when touching the bottom or grasping heavy objects.

Violent operation during tug-of-war and bottom hanging can easily cause the fishing rod to get stuck. In both cases, it is forbidden to pull the fishing rod back violently. It is best to use a loose rope to catch big fish, and try to find a hook unloading point from the side of the fishing point after hanging the bottom.

4. Don't use the rod oil for a long time and store it safely.

In winter, or when the fishing rod is not used for a long time, it is necessary not only to clean the rod body, but also to cooperate with the smear rod to protect the oil and do a good job in maintaining the fishing gear.

5. Wipe the seams to avoid sticking materials, and gently polish them.

When we get a new fishing rod, we can drop 3-5 drops of 502 on each rod section, or drop a small amount of wax oil on it, and then change it into high-mesh sandpaper to polish a layer with a light force to improve the friction of each section.

Third, the attention points of fishing rod maintenance 1, fishing rod maintenance attention to soak in the rod

When fishing, it is common that the fishing rod falls into the water because of rain or carelessness. If the outside of the fishing rod is just a little wet, dry it. If there is water in the fishing rod, it should be solved immediately after returning home: if it is a hand rod, the sections should be separated; If it is a sea pole, you should open the covers at both ends and put them in a ventilated place to dry.

2, fishing rod maintenance pay attention to the rod body fracture.

At the same time, avoid the fish dragging the fishing rod to rub on the ground; A fishing rod that is not firmly supported should avoid being dragged into the water by fish. When a fish is hooked, especially when catching a big fish, don't lift the pole violently. Although the fishing rod has good elasticity and toughness, it is not suitable for violent swinging and lifting. We should make full use of the way of walking fish to prevent the fishing rod from breaking.

3, fishing rod maintenance pay attention to whether the fishing line is hanging.

Some anglers always try to lift or yank the fishing rod after the hook is hooked by underwater debris. This is a very wrong action, which may break the fishing rod or cause the joint to crack or loosen. If the hook is hung, you can pull it by hand. If you still can't pull, you can wrap the fishing line around your waist and walk backwards. You'd rather break the hook to maintain the float and fishing rod.