Manufacturing method and material of bow and arrow

The main body is made of glass fiber sheet. This thing is super easy to use, much stronger than the traditional bow material, which is also the result of scientific and technological progress. Bow handle and bow tip are made of Sophora japonica. Bowstring, using tire thread, is compiled by myself, and there are ready-made teaching materials on the Internet. Bow arm leather decoration, originally prepared to buy snakeskin, but later thought about using synthetic leather.

Everything is ready, let's get started. Firstly, the middle part of the glass fiber sheet is polished according to the shape of the bow handle, and the radian matching with the bow handle is polished. It must be noted here that the powder of glass fiber can't touch the skin, otherwise it will be allergic and itchy. Then stick the bow handle to the bow piece.

After the glue is applied, the bow handle and the bow piece should be clamped with a clamp and left for 24 hours until they are firmly stuck together. Press the top of the bow again and wrap the tire line around it. Every turn should be coated with 502 glue to ensure that the thread is always tight, there is no gap and it will not spread.

Installing the bow tip is a technical job, so it must be straight and not a little skewed, or you will encounter great trouble when installing the bowstring finally-the so-called bow turning.

Make bowstrings. Use tire ropes and more strands to ensure that the bowstring can withstand enough tension. I used eight shares. The middle part is carefully wrapped with a tire line and glue is dropped to ensure that it does not spread.

Finally, wrap the outer skin, and then tightly wrap both ends of the bow handle with tire thread, mainly for coordination and beauty.

Press the bowstring, press it backwards, open it, and the Ming bow is completed with one stroke.