What is the difference between EPS thermal insulation composite line component and traditional line component?

First, there are three kinds of traditional line elements:

(1) On-site cast-in-place concrete line:

The cast-in-place concrete line needs to be formed on site, and the formwork can only be used once, which is a huge waste, easy to expand the formwork, difficult to guarantee the geometric size, and it is difficult to achieve the effect by hand painting on the surface on site, and it does not have thermal insulation performance.

②GRC prefabricated line members

GRC prefabricated line components are heavy in weight, and there are potential safety hazards at high altitude, and the geometric dimensions are not accurate enough. It is very difficult to handle joints and seams, and it is also very difficult to install them. Using steel expansion bolts to connect with the wall affects the appearance of the external wall, and the joints are easy to crack, waterproof and have no thermal insulation performance, which can not prevent cold and hot bridges.

③ Plaster line component

Gypsum thread itself is not waterproof. When it meets rain and sunshine, it will have low weathering strength and poor weather resistance, so it can't be used outdoors, with poor accuracy and no heat preservation performance.

Second, insulation composite line: eps line component is insulation composite line, which has the following advantages and can completely solve the shortcomings of traditional line.

Fully show the smooth and elegant feeling of the building.

Architects can boldly develop their own design concepts and architectural styles.

Labor and material saving, simple operation, safety and reliability, and good thermal insulation performance.

Modeling, the surface structure of the component is exquisite and uniform, and the geometric size is accurate (error ≤0.5mm).

Joints are crack-free, waterproof, fireproof, leak-proof, weatherproof and durable.

No potential danger, light weight, easy operation and high safety.

Completely solve the problem of hot and cold bridges of thermal insulation walls, doors and windows.

Can be directly attached to the installation component ≤30kg/m? The tile (stone) below.

The construction of eps line components is simple, convenient and time-saving, which greatly improves the construction progress.