A simple tutorial for pasting a gold paper.

The simple tutorial of gilded paper is as follows:

1 First of all, the surface of decorative gold foil should be smooth, and there should be no dirt such as dust.

2. Apply Bo Tu to the surface to be gilded.

3. Use good raw rice paper or coarse rice paper, which is thinner and has better water absorption. If it is glue, it must be absorbed with raw rice paper. Stick raw rice paper on the surface coated with pigment or glue, pat it with pure cotton cloth (soft texture) to make it fully contact with the surface, then take it out with tweezers and suck it again with a new one. Repeat this action three or four times.

4. Pick up the gold foil together with the rough paper with tweezers and stick one side of the gold foil on the surface of the object. It must be light. The gold foil is attached to the surface of the object, and you can gently blow it with your mouth to flatten it.

5. After completely drying, the surface can be coated with varnish. If it is glue paste, the surface is coated with protective glue. I've also seen transparent paint.

Six elements of gold foil maintenance:

1, gold foil is easy to be broken or damaged carelessly, and it has no protective ability. It is completely protected by the outer paint, so special attention should be paid to avoid collision or man-made damage when using it.

2. When cleaning and maintaining, do not use hard objects or items with sharp edges, which may damage the protective paint. So that part of the gold foil falls off, affecting the overall appearance, and can be cleaned with a soft towel.

3. It is very important to clean the gold foil in daily use, and avoid using cleaning agents with chemicals.

4. If the gold foil product is damaged or falls off, don't wipe it with a fingernail or a hard object, which will only make the damaged area bigger. You should find a professional master to repair and brush protective paint in time.

5. Gold foil products are fragile and high-end products. Therefore, when moving, the protective pad must be placed on the gold foil to avoid collision.

6, often exposed to the sun, will make the paint surface of gold foil products appear oxidation phenomenon, seriously affecting the appearance.