The most accurate method of tuning four fishing two illustration

Tuning four fishing two illustrations are as follows:

Step 1: buy the lead skin first do not cut off, so that it is the whole on the top of the first heavy lead to find the bottom, explore the depth of the water.

Step 2: float downward movement, the length of the movement than the length of the subline is about 5 centimeters longer than the length of the line can be, of course, you move a 6, 7 centimeters is also possible.

Step 3: Gradually cut off the lead skin, so that the top of the float is exposed to the surface of the water for four eyes, which is often referred to as "adjustment 4".

Step 4: With both hooks baited, test how far the float can be pushed down into the water, which is different for an empty hook and a baited hook. With this test, we can tell if the bait is empty underwater just by watching the float's sight while fishing.

Step 5: Move the float up and expose the top two eyes to the water to complete the "fishing 2", from which the "4 fishing 2" is officially completed.

Empty hook to adjust four eyes

The first step is to adjust four eyes with an empty hook, but if you come up to start adjusting the drift is definitely not allowed, because you have not yet found the bottom. Any drifting method needs to find the bottom first, the purpose of finding the bottom is to determine the half-water depth, after all, drifting is carried out in half-water, half-water depth is close to the actual depth of water, drifting is more accurate.

Find the bottom after the float pull down about 1.5-2 times the length of the subline, and then began to trim the lead skin, until the float exposed to the surface of the water 4 eyes, but also need to pay attention to is if the process of drift pressure wind line, remember to always be pressed, otherwise the adjustment will be inconsistent.