How to connect Yuba with the remote control?

1. Turn off the main power switch first, and connect the Yuba zero line directly to the zero line of 220V power supply, and stick it well.

2. Six-wire Yuba is generally a four-in-one combination switch, as shown in the following figure:

These six lines are brown, white, yellow, black and blue. Red. Brown is the fire line, and the other five elements are the outgoing lines, that is, the control line.

The brown live wire and blue zero wire of the power supply can be connected separately according to the legend.

The live wire of 220V power supply is connected to the end where the three terminals of Yuba switch are connected together (Yuba switch has six connectors, three of which are connected by two wires, and the live wires of incoming wires are connected together), and the other three connectors that are not connected are connected to the other two Yuba lamps and an illuminating lamp of Yuba, and then electrified. Over.

Different brands of Yuba wiring, wire color is slightly different, you can refer to Yuba instructions for wiring.

Remember that the zero line of Yuba is directly connected to the zero line of 220V power supply, usually the black one.