What are the ways to iron clothes made of different materials?

1/ Anti-wrinkle smoothing technology for sweaters

Sweaters, knitted materials and other clothes will destroy the elasticity of the tissue if they are directly ironed. At this time, it is best to spray water on the wrinkles with a steam iron. If the wrinkles are not very serious, you can also hang them and spray them directly on the wrinkles. When they are dry, they will naturally be smooth.

In addition, it can be hung in the bathroom and smoothed by hot steam in the bath. Knitted clothes are easy to deform, so it is not advisable to press them hard, just press them lightly.

2/ Velvet ironing skills

Velvet long wool cloth should be treated on the principle of not destroying its original performance. So turning it over to face, overlapping hair as a hot pad, and then ironing it from the inside with a steam iron can make its special properties more obvious.

3/ The ironing skills of plush cotton-padded jacket.

The fabrics of plush cotton-padded jacket are mainly corduroy and velveteen. When ironing, a wet cloth with water content of 80% ~ 90% must be covered on the front of the cloth, and the ironing temperature should be adjusted to 200℃ ~ 230℃, and the wet cloth should be ironed directly. When the wet cloth is scalded until the water content is 10% ~ 20%, the wet cloth should be taken out and the fluff should be smoothed with a brush.

Then reduce the temperature of the iron to 185℃ ~ 200℃, iron the back of the cloth directly and dry the cloth. Pay attention to the even direction of the iron when ironing, and don't use too much force to avoid burning strong light.

4/ How to iron clothes wrinkles?

Down jackets should not be ironed with an electric iron. When wrinkles appear, you can use a large enamel tea jar filled with boiling water and put the wet cloth on the down jacket before ironing. This will not damage the fabric, nor will it leave ugly light marks on the surface of the clothes.

The indentation of woolen clothes after passing through is usually difficult to recover, mainly the dumping of pure wool. Hot steam can repair clothes.

Hang the steam iron at a height of about 1 cm from the woolen cloth, and the woolen cloth fibers will "stand up" again after absorbing enough hot steam. After the embossing is removed, if you want to make the clothes more beautiful, remember to adjust the temperature back to medium temperature, cover the lining cloth and iron it.

6/ Ironing skills of leather garments

Leather clothes are wrinkled, and the temperature should not be too high when ironing, and it should be controlled within 80℃. When ironing, you should use a clean thin cotton cloth as the lining, and then move the iron back and forth evenly. Use light force to prevent the iron from directly contacting the leather and scalding the leather.

7/ Ironing Skills of Suede Clothing

Washed and decontaminated suede garments should be shaped and ironed. Washed suede clothing, due to shrinkage in water, the leather board is tight. You can brush the clothes with a hard brush, which will make them soft and then iron them.

8/ Ironing deformed pants

Pants are worn for a long time, and knees often swell up. For this kind of deformed trousers, it is best to use an electric steam iron to iron the second half of the trousers first. When ironing, first straighten the back half of trousers by hand, and unfold the wrinkles for ironing until the back half of trousers returns to its natural state. Then iron the front half of the trousers.

When ironing, because the knee part of the first half has bulged, if the trousers are straightened, the first half will wrinkle. At this time, the trousers should be ironed from the upper and lower parts. First, the iron should be gently placed on the trousers, and the steam switch should be pressed, so that the wrinkled part will naturally retract under the heat of the iron.

The same method applies to the knee. When the big drum bag becomes a small drum bag, continue to adopt the above method, and repeat it to completely restore it to its original state, and finally iron the whole trousers again.

9/ The secret of pleated skirt ironing

It is very troublesome to iron pleated skirts, so wear them on the ironing table when ironing, so that the front and back sides of the skirt will not overlap, so that the skirt will not burn to the other side. In addition, slightly tilting the ironing table is the secret of ironing beauty.

10/ "light" on ironing clothes

After wearing a dark suit for a period of time, elbows, knees, hips and other places often glow, especially in winter. Add a small amount of detergent to a basin of warm water, wet the luminous part with a towel, spread a layer of cloth on it and iron it, and the luminous phenomenon will naturally disappear.

1 1/ Order for ironing shirts

When ironing shirts, you should start with the sleeves and then iron them in turn: collar, shoulder pads, back and front. Spray wet first, then stroke the seams such as lace, cuffs and neckline on the clothes with your fingers, and pull the clothes up and down to make them flat, so that the clothes can keep their style along the patterns and seams of the cloth.

12/ Wonderful six ironing methods

A. exposure to eliminate scorch

When clothes are burnt, cover the unburned part with paper or other things, spray the yellow part with cold water and expose it to the sun. When the water is dry, spray some more water until the color of each part is similar.

B. Technology of removing iron marks with sugar

In order to eliminate the traces of ironing, you should soak the cloth in water and dry it until it is half dry. Turn on the electric iron and put it in the air, put some sugar on it, and then turn off the power when it is saccharified.

Then gently wipe the bottom of the electric iron with a dry cloth, that is, the trace of ironing while it is hot, and repeat it several times to eliminate the trace of ironing.

C. Fine salt removal and ironing methods

When the cotton fabric is browned, you can immediately sprinkle some fine salt on the browned part, then rub it with your hands, brush it gently with a toothbrush dipped in cold water, then put it in the sun for a while, and finally wash it with clear water, so that the scorch marks can be eliminated or alleviated.

Remove the scorch with sandpaper.

When the thick woolen cloth is burnt yellow, it can be rubbed gently with fine sandpaper, brushed gently with a toothbrush to make it appear new fluff again, and then put a wet cloth on it and iron it backwards along the original fluff of the woolen cloth, which can generally eliminate the scorch marks.

E. baking soda ironing method

When the silk turns brown, you can immediately coat it with a little baking soda and add water to make it into a paste. After drying, you can brush it lightly with a toothbrush and iron it with a clean wet cloth to eliminate the scorch marks.

F. alum decoking.

When the woolen cloth is burnt yellow, you can brush alum dissolved in boiling water and dry it in the sun to reduce scorch marks.

1 1 ironing skills of various fabrics

Cashmere products: After air drying, iron them with an electric steam iron at moderate temperature (about 140 degrees Celsius). The distance between the iron and cashmere sweater is 0.5- 1 cm, and it is forbidden to press on it.

Pants are deformed: if you wear pants for a long time, your knees will often bulge. For this kind of deformed trousers, it is best to use an electric steam iron. First, iron the back half of the trousers. When ironing, straighten the back half of trousers by hand, stretch and wrinkle, and then iron until the back half of trousers returns to its natural state. Then iron the front half of the trousers. When ironing, because the knee part of the first half has bulged, if the trousers are straightened, the first half will wrinkle. At this time, the pants should be ironed from top to bottom. First, put the iron gently on the trousers, press the steam switch, and let the wrinkled part naturally retract under the heat of the iron. The same method applies to the knee. When the big drum bag becomes a small drum bag, continue to adopt the above method, and repeat it to completely restore it to its original state, and finally iron the whole trousers again.

Synthetic fiber: Chemical fiber clothing has poor hygroscopicity and different heat resistance. Therefore, mastering the ironing temperature is the key, and the ironing method is basically the same as other cotton and wool fabrics. Nylon fabric is wear-resistant and elastic, but the ironing temperature should not be high. Dry cloth should be used as padding before ironing. Polyester fabric is wear-resistant and wrinkle-resistant, and can be washed and dried without ironing. Because there are many kinds of chemical fiber clothing, the temperature is difficult to grasp. Before ironing for the first time, you can try to iron the inconspicuous parts of the clothes to prevent the rabbits from ironing.

Cotton and linen fabric: you can turn on the steam. Generally, the method of internal ironing is adopted. If the front is ironed, a clean white cloth should be padded. Colored clothes should be ironed first, and the temperature should not be too high, so as not to reflect light or cause flooding after ironing, which will make the clothes brittle. When linen fabric and cotton-linen blended fabric need to be ironed, the temperature of the iron should be low, and the cloth should be padded first to prevent pilling from damaging the clothes.

Silk fabric: Silk clothing often shrinks due to its poor wrinkle resistance after washing, and it will affect its appearance if it is not ironed, so it must be ironed after washing. When ironing, the temperature should be appropriate and the method should be appropriate. To iron at low temperature, the ironing temperature is generally between 1 120℃. If the temperature is too high, clothes will easily flood, shrink, soften and deform, and even be damaged in serious cases. Clothes with delicate and light colors and blended silk clothes have lower temperatures. Don't use too much force when ironing. The iron should keep moving and don't stay in one place for too long. Don't iron the silk surface directly, but iron it with cloth, or iron the back of clothes to prevent aurora. Branding water stains affect appearance and washing quality.

Ties: The fabrics used to make ties are mostly silk, and the lining is usually fine cloth or linen. Use medium-low temperature to iron quickly, put a dry cloth on the ironing pad, and don't let the steam directly touch the tie.

Pleated skirt: first iron the skirt head, fix the position of all pleats, and then iron the pleats one by one. After ironing each wrinkle, lift the wrinkle and iron its bottom to further fix the wrinkle.

Shirts: Iron from top to bottom. Collar: hot from the outer ends of both sides to the middle; Sleeves: ironing from the bottom of sleeves to shoulders; Body: iron the front first, then the back.

Suit pants: turn the pants over and straighten the trouser pockets inside; Put the trousers back on the front, iron them from the inside to the outside of the trouser leg surface, and then iron the bottom of the trouser leg. It is not suitable for direct ironing, and a thin cloth should be placed before ironing.

Tang suit: When ironing, you should choose an electric steam iron. The temperature should be moderate, usually 30-40 degrees.

Leather clothing: the temperature should be controlled within 80 degrees. At the same time, clean thin cotton cloth should be used as the lining when ironing, and the iron should be moved repeatedly with light force to prevent the iron from directly contacting the leather and scalding it.