How to get the wood on the roof of a brick house with shingles

Press the shingle a piece of positively placed a piece of negatively placed, so that you can cover the roof of the wood, the eaves of the wood are covered with a special board. Pipe is to take the method of pouring the slope, or directly with wooden boards plus cover the method of tiles, as the roof of the rural new house can be, but I personally think that the rural new house, the roof of the slope with wooden boards is better than cement concrete pouring.

Self-built house brick and wood structure slope tile roof wood structure of specific practices

Self-built house brick and wood structure slope tile roof wood structure and the past tile roof is not very different, just because now the slope tile roof are glazed tiles and no longer in the past the small green tiles, which need to be added to a tile hanging bar, so the wood structure also includes rafters, rafters and Tile hanging bar.

The purlin is the lowest load-bearing body of the tiles, usually 60-70cm spacing, rural purlins are usually cedar, because cedar is lighter and stronger, only a few will use pine or other wood.

Self-built house brick structure of the sloping tile roof rafters are pine boards, spacing can be determined according to their own needs, the landlord can be full, and then covered with a layer of tarpaulin, and then nailed to hang the tile on top of the general practice of the rafters are nailed at intervals of 10 to 15cm.

The last fixed tile hanging bar, hanging tile are purchased with specifications of the wooden square, spacing according to the different specifications of the glazed tile and different, the usual practice is a piece of glazed tile a hanging tile, such as 30 * 40cm glazed tile, that is, 37cm or so one.