Floor fan installation video tutorial

1, chassis installation

First, take the elbow screw and pressure plate out of the column, insert the column into the base, put the pressure plate on the lower part of the chassis, and tighten it with the elbow locking screw clockwise.

2, the overall installation

(1) first loosen the lifting lock nut, pull the lifting tube out of the column, and then use the lifting lock nut to lock the pretty goods.

(2)Loosen the lower body clamp nut, insert the body into the lift tube and tighten the clamp nut.

(3)Loosen the lift lock nut, adjust to the desired height and tighten the nut.

3.Install the rear grille

Screw down the airfoil fixing nut from the motor shaft and then screw down the triangular nut, and then install the rear grille.

4, install the wind blade

When installing the wind blade, you should make the groove at the back of the wind blade stuck on the limit pin of the motor, and then tighten the fixing nut counterclockwise.