What method is used to glue a tray with nine small paper piers quickly and cleanly?

65438+ Similar to the principle of miscibility, if you continue to use new tape, you can slowly stick the old tape, or directly use gasoline and banana oil, and the effect of water use is the least ideal. 3. If the area is not large, consider using an eraser. If you have expired hand care and skin care products at home, apply them on the rubber surface, because the binding water in the adhesive tape is supplemented, so the viscosity is reduced and the effect of removing traces is very good. 4. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, etc. ) .5. If you repeatedly stick and tear with transparent adhesive, you can remove part of the surface. 6. Wipe it off with a little sodium chloride solution, or use paint thinner. 7. Blow dry with a hair dryer, and then scrape it gently. 8. Wipe with a cotton swab dipped in nail polish remover. 9, wind oil fine rub. 10, wipe with special cleaner or sports shoes decontamination paste. 1 1. It can be erased with 4b eraser for painting, which is a very soft Korean eraser. 12. If the trace left behind becomes hard after a long time, you can soften it with a hot towel first and try again.