What is the best choice for living room floor tiles? The purchase of the comparison has the skills

The overall decorative effect of the living room depends on many factors, which plays a key part of the living room floor tiles, living room ceiling and a variety of furniture, today we recommend a variety of materials suitable for living room floor tiles as well as a comparison and analysis of the middle of the process, which can be learned and choose other building materials products, floor tiles, there are many styles, patterns, colors, and so on. Different, we should be from the perspective of green, cost-effective and late life or after-sales service to start, choose the right living room floor tiles.

A living room with what floor tiles

Living room floor tiles of 1, glazed tiles

Glazed floor tiles that absorb 3% to 10% of the glazed tiles.

Material: clay, quartz, feldspar fired.

Production process: the production process is generally the selection of materials, ingredients, crushing, sedimentation, spray drying, compression molding, drying, glazing, sintering, inspection and packaging steps.

Calculation formula: the number needed = total area / length of the tile / width of the tile

Living room floor tiles of 2, porcelain tiles

Porcelain floor tiles are tiles with a water absorption rate of 0.5% or less.

Material: clay, quartz, feldspar fired.

Production process: the production process is generally the selection of materials, ingredients, crushing, sedimentation, spray drying, compression molding, drying, sintering, inspection and packaging steps.

Calculation formula: the number needed = total area / tile length / tile width

Living room floor tiles of the 3, patchwork tiles

Patchwork tiles is the firing of the tiles are cut and assembled into a variety of patterns to play a decorative role.

Material: clay, quartz, feldspar fired.

Production process: the production process is generally the selection of materials, ingredients, crushing, sedimentation, spray drying, compression molding, drying, sintering, cutting, inspection and packaging steps.

Two, choose skills

Choose a well-known manufacturers to avoid many problems, but how to avoid dropping the package, to fake it, first of all, tile flatness is the first, otherwise in the superb craftsmanship can not be paved, tiles into the field can be different types of wrestling two pieces, to see the interior has no problem.

1, the appearance of the color to be uniform, surface gloss and flatness to be good (except for special processes), especially polished tiles should pay more attention to their gloss, the higher the gloss, indicating that the polishing process is more exquisite, the relative hardness is also the higher, and thus the low water absorption rate, the higher the degree of wear resistance.

2, anti-pollution ability to be good. On the surface of the tile drops of ink or colored water, half an hour later with a wet rag to wipe away, if there are obvious traces that it is easy to seepage stains; basically did not leave any traces, it proves that it has a very good anti-pollution ability.

3, size deviation can not be too large. That is, four tiles together, should be more regular, no obvious misalignment. Size error greater than 0.5MM, flatness greater than 0.1MM products, will not only increase the difficulty of construction, while the effect of decoration is also poor, can not be used in the project.

4, water absorption rate to meet the requirements. The lower the water absorption rate, the higher the density of its products, the less likely to penetrate. Usually colored ceramic tiles not more than 10%; unglazed ceramic tiles (including polished tiles) shall not exceed 0.5%; glazed ceramic tiles not more than 1%.

5, see whether the quality of floor tiles qualified. Tile decoration and pasting quality is mainly to see whether the joints between the brick and brick is greater than 0.5 mm, the overall surface flatness in the 2-meter-long range is greater than 2 millimeters, seam straightness in the 5-meter length of more than 3 millimeters, where more than the above range are substandard quality of the decoration.

6, listen to the sound of tiles: identify the intrinsic quality of the tiles, rely on the look is not visible, you can use the method of knocking, from the sound of identification.

Method is: hands each hold up a tile, with a corner of a brick gently knock another brick surface, the sound is crisp and loud for good, burned cooked; if dull for poor, indicating that the brick has a heavy skin or crack phenomenon, heavy skin is a brick molding, the material in the air has not been discharged, resulting in the material and the material between the combination is not good, the internal cracking, can not be seen on the surface, only to listen to the sound can be identified.

Through the examples above, we can learn that the common living room floor tiles can be glazed tiles, can also be other common ceramic tiles, different materials corresponding to the scope of adaptation is not the same at all. We can according to their own home living room decoration style of the expected standard, as well as demand and budget difference, choose a reliable one, for example, generally speaking, the traditional glazed tiles using clay quartz and so on fired, they have a certain degree of gloss on the surface, especially suitable for the European traditional style, or modern minimalist style choice, we can refer to understand.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design scheme", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get free Oh~