Decorate the ceiling of your home gypsum board ceiling tutorial

Gypsum board ceiling is a decoration material that many owners like very much. Gypsum board ceiling is easy to form and has long service life.

But now everyone doesn't know the installation steps of gypsum board ceiling. Bian Xiao sorted out the detailed installation steps of gypsum board ceiling, and each step was clear. Knowing more about these will be very helpful for everyone to install gypsum board ceiling.

1. Gypsum board suspended ceiling tutorial Before the formal construction, workers should first measure the horizontal line of chalk line with a horizontal pipe, just to ensure the reference elevation, so that there will be no height difference on the sloping roof installed later.

2. Gypsum board ceiling must be fixed on the solid frame of wooden keel. Gypsum board ceiling tutorial Therefore, it is an essential step to carefully select keel materials. I suggest you choose pine with good clamping force.

Because the keel is made of wood, we should pay attention to fire prevention. The usual practice is to evenly brush the fire retardant coating on the keel surface. When the whole keel is white, it can be nailed to the wall to ensure contact with the wall. And paint it with fireproof paint.

4. After the keel surface is fireproof, the combination can be started. Workers will use a nail gun to fix the angle between the two keels at 45 degrees. At this point, we should grasp the strength to avoid cracks in the keel.

5. Once the keel frame is nailed firmly, it should be fixed on the wall. At this time, it is necessary to carefully check whether the spacing between frames is not more than 300mm to ensure sufficient firmness. Otherwise, gypsum board will sink and crack easily.

6. Gypsum board ceiling tutorial The next step is the official gypsum board. Workers had better nail the drywall with drywall stainless steel, so that the nails won't rust, and the gypsum board can also ensure the beautiful appearance in the future.

7. Gypsum board ceiling tutorial Nail holes on gypsum boards are usually treated with rust-proof nails, and practical cement-filled nails are a more cost-effective method. And the effect after treatment is no worse than nail art.

8. The gap between the two drywalls should be treated in the next step, otherwise there will be obvious cracks in the future. Gypsum board ceiling tutorial ordinary workers will use glue 90 1 and gypsum powder to mix and fill.

Bian Xiao or above? The description of the steps needed for the ceiling, I hope it will help your decoration, and I wish you a happy life here.