Window cutting process

1. Prepare a square piece of red paper.

Step 2 fold in half

Step 3 fold in half again

4. The third discount

5. The fourth discount

6. Draw the shape to be cut with strokes as shown in the figure, and cut along the drawn figure with scissors.

7. Effect after cutting

8. Open the cut window grilles, and the effect is as shown in the figure.

：

model

Window grilles are all suitable for patterns, and most of the window grilles in Shandong are straight, which is suitable for straight windows in this area; Northwest window grilles divide the complete paper-cut into four pieces with the word "ten", which is also suitable for forming a cross in the center of the window. The window grilles in Hunan have a fixed combination. Generally, double happiness flowers are inserted in the middle, butterfly horns are inserted in the four corners, and a pair of wedding candles, flower baskets and plates are placed on both sides of the group flowers.

In order not to affect indoor lighting, window grilles are mostly cut in the sun to get more hollowed-out area. The outer contours of window grilles and window frames are required to be comfortable and symmetrical, which can play a practical role in cold protection and ventilation in addition to beautiful decorative factors. In order to pursue fresh, bright and lively interior decoration effect, window grilles are often carved with fine wire cutting to achieve hollow and exquisite visual effect.

Sogou encyclopedia: window grilles

How to cut the window grilles? How to cut the window grilles? Simple paper-cutting tutorial for window grilles

The process of making window grilles

Tools/raw materials; Red paper, scissors, pen

Methods/steps

1 Prepare a piece of red paper, preferably double-sided red (I specially found a single-sided red paper to demonstrate the folding effect), about 20 cm square.

2 fold the red paper in half diagonally once, and pay attention to flattening it. Because this paper-cut should be folded in multiple layers, each layer should be as strong as possible.

3 Fold the folded paper in half along the center line so that two 45-degree angles overlap.

4 Fold the paper folded twice along the center line and continue to overlap the two 45-degree angles.

Folding in half again is different from the last two times. This time, one of the 45-degree angles (note that it is the side that is connected together, not the side that has scattered several pages) is folded in half. This time, the other side did not form an alliance.

Draw a pattern on the short side, as shown. Here, I draw a shadow for everyone to see clearly. In practice, as long as I can see the effect, I don't have to draw heavy shadows.

7 along the underlined part, cut off all the shadow parts with scissors. Pay attention to cut slowly, it will be easy to cut if you are not careful. Also pay attention to the use of sharp scissors, because the paper is 16 layer folded and relatively thick.

After cutting, spread out all the red paper. In this way, a beautiful paper-cut work-window cut was cut successfully. You can cut a few more.

Simple instructions on how to cut window grilles.

Window grilling is an ancient traditional folk art in China with a long history. Here is a simple paper-cutting method.

Preparation materials: red paper, scissors and pen.

Steps:

Step 1: Prepare a square piece of red paper.

Step 2: Fold in half

1. Fold two corners to form a triangle.

2. Fold the two corners below the triangle in half, and then fold the two corners above the figure 1 in half.

Step 3: Draw a picture. Draw the pattern to be cut on the paper with a pen.

Step 4: Paper-cutting. After painting, start cutting with scissors. Be careful when cutting, cut slowly, and don't cut the paper.

Step 5: Open it slowly after cutting to avoid tearing the window grilles. Beautiful window grilles will be cut.

How to cut window grilles! ! ! ! ! Important steps

1. Line-to-line connection and disconnection. Because paper-cut works are cut out or carved out on paper, hollowing out must be adopted. Because of hollowing out, paper-cuts with public lines must be connected with lines, and paper-cuts with bus lines must be disconnected with lines. 2. Composition modeling Composition mainly depends on the connection of images in content, and there are many combinations used. Because of the exaggerated deformation in modeling, some formal beauty laws of patterns can be used.

Common ones are "layers of high bases" or "borrowing things for scenery". 3. The image is exaggerated, concise, beautiful and full of rhythm. It is required to pay attention to the main part of the image and boldly give up the secondary part to make the main body clear at a glance.

The figure should be prominent, forming a simple and generous aesthetic feeling, the posture of the object should be exaggerated, the action should be big, and the posture should be beautiful. 4. Simple and clear paper-cut colors should be simple and complicated, and the configuration of the same color, similar color and adjacent color should be less. Seek harmony in contrasting colors.

At the same time pay attention to the proportion of colors. 5. Knife should be "steady, accurate and skillful". At the same time, when carving a large number of paper-cuts, in the application of knife method, you should cut or not, and the cut paper-cuts should look thick.

When using a knife, you must cut it up and down like a hacksaw in your hand, and the force should be rigid and even, otherwise the knife will lose its flexibility thousands of miles away. Be careful not to swing back and forth from left to right. Hold the knife vertically up and down, and the carved paper-cut will be accurate.

When cutting paper, both cutting and lifting should be accurate, especially where the knives are connected. Just say it and you can cut it. Here we go. Otherwise, the lines are easily cut or torn by the knife. "Qiao" here mainly refers to the "sawtooth" and "crescent" carved with a clever knife.

These are two very important knife methods in paper cutting. "Sawtooth" is naturally produced by the author due to the cutting movement of paper and knife in the production process. It uses the ratio of length, density, straightness, rigidity and softness of sawtooth, and combines the characteristics of different objects to express its texture, sense of quantity and structure.

"Crescent Moon" is also a variety of arc-shaped decorations naturally produced in the process of cutting and carving. Gravure carving is the main way to show the lines of characters' clothes or destroy large black areas. According to the characteristics and shape of the same object, it can be long or short, wide or narrow, curved or straight, and can be changed into various types. Besides "sawtooth" and "crescent", there are other forms of folk paper-cutting, such as flowers, vortex patterns, moire patterns and water patterns.

How to cut the window grilles (steps)?

Tools for traditional paper cutting: scissors, pencils, rice paper, wax board, carving knife, needle and thread, dye or ink, brush, kerosene lamp and iron. Traditional operation flow 1. Printing and Dyeing Paper-Traditional paper-cutting artists in China will dye the paper red with a brush, because in China, red represents auspiciousness. 2. Hot stamping-After the dyed rice paper is dried, wrinkles usually appear. At this time, it is necessary to iron the crumpled paper with a warm iron. 3. Make a template-the image of the peacock below is very simple. Draw the outline of a peacock with a pencil. 4. Smoked template-Take a piece of paper dyed and prepared by Zhang Gang, wet it, and then press the template on it. Such that one side of the template faces the kerosene lamp. The template and the place where the template is not covered will be blackened by kerosene lamps. When the paper is completely dry, take off the template, and then leave the place smoked by kerosene lamps and the blank covered by the template that has not been found. This is a paper-cut model. 5. Stacking-put the paper-cut samples on a small pile of paper dyed with lewd colors, about 20 pieces, and then seal them together. 6. Paper-cutting-Paper-cutting artists in China usually choose scissors with sharp long handles, which have strong fracture toughness. Use it to cut the one with visible graphics, so that other papers can be cut at the same time. The first is to cut the pattern inside, and the second is to cut the edge outside. Among all kinds of scissors in China, Yuxian paper-cutting is unique. It is a stippling paper-cut with negative engraving as the main part and positive engraving as the auxiliary part. Its technological process can be divided into the following six processes. 1. Painting: Designers draw patterns according to their own ideas or customers' requirements, which is generally called painting. Second, the order: sort the painted looks on the rice paper (generally fifty pieces of rice paper at a time are appropriate), and divide them into small pieces with scissors according to the size of the looks. 3. Soak: soak the ordered goods in water and take them out, then squeeze out the water contained in them and dry them in the sun. 4. Carving: Put the soaked goods on the wax board and carve them according to the requirements of the pattern. 5. Dyeing: Coloring the carved products. Raw material coloring and dust removal; Tools are a writing brush and a clean newspaper. 6. Packaging: The products produced by the above five processes are packaged in the form of paper plastic or books, picture frames, gold and platinum.

The collection of solved problems is reproduced in QQ space! ! The fifth step of simple paper-cutting method [label: paper-cutting, steps] is urgent! ! For the exam (5 stars). Four sides. Octagonal. . Symmetric figure. Lace pattern) The above three cutting methods are cut out respectively. Plants. Animals (comprehensive modeling (casual cutting)) had better have pictures (suitable for novice cutting, not too complicated)? Answer: 4 Popularity: 1 183 Solving time: 2008-12-2716:19 Satisfied with the answer, he had a detailed paper-cut introduction to perfect the answer, and adopted the blue tears answer.

How to cut window grilles during the Spring Festival?

Prepare a square piece of paper. If there is no colored paper, use the paper in the notebook instead of folding it in half on one side and completely overlapping it on the other. Turn the paper over and tear it off to get a folded isosceles right triangle. After the two bottom corners of a triangle are folded in half, a folding line will appear, and the bottom corner of one side will be folded to the opposite side with the intersection of the folding line and the hypotenuse as the top. As far as possible, the angle between the folded part and the exposed part is 60 degrees, and the operation on the other side is the same as the previous step, thus solving the problem of camera angle. In fact, the lowest angle of this shape is almost 60 degrees at present. Fold it in half again and start drawing lines at the overlapping part below. Various areas with diagonal lines are for reference: jingyan.baidu/article/2c8c281d12b3f20008252abb, please adopt them if you are satisfied.

If you have any questions, please ask. Thanks for your support.