How to solve the problem of warm air in bathroom ceiling

How to solve the problem of warm air in the bathroom ceiling? It can be adjusted by the temperature control function of the bathroom air heater. If the heater in the bathroom is equipped with a temperature control switch, you can see that the temperature control function key is installed on the switch. Press the plus sign to adjust it and directly adjust the temperature of the bathroom. If the equipment has no temperature control switch, it is controlled by the machine itself.

How to replace the air in the bathroom ceiling if it is broken? First, turn off the heating power, then take a ladder. Then open the heating cover so that you can see the lights inside. Remove the lamp tube and divide it into plug-in type and buckle type. Then we buy a new one according to the model of the lamp, and then change it into a new one. The new replacement method is to install the lamp tube first, then install the heating cover and turn on the power supply.

The air-heated yuba is broken 1 How to fix it? There is no response when the power is turned on, and the indicator light is not on. This situation is caused by a blown fuse on the power drive circuit board. Just replace the fuse.

2. The air volume of Yuba is obviously reduced. Generally, there is too much dust in the air inlet, which leads to poor ventilation if it is not cleaned. Clean the air inlet.

3. Only cold air blows out, but no hot air. It shows that PTC ceramic heating elements do not work because overheating protects or damages the thermal circuit, which is normal. In this case, a new heater needs to be replaced.

4. The remote controller loses its remote control function. This kind of fault is probably caused by the damage of infrared emitting diode or infrared receiving tube, or by the power failure of the remote controller. If it is an infrared fault, it can be replaced. If it is a battery problem, a new battery can be installed.