How to sew invisible zipper Quick sewing method of invisible zipper

/|||| 0/.First, prepare an invisible zipper. Before putting it on, unzip it and iron it with an iron. Because all zippers will be malleable after use, we iron them flat to make them lose extensibility, and then sew them on clothes so that they will not be deformed again.

2. Sew the rest of the clothes and leave the zipper. Get a pin or pin ready and zip up the ironed zipper. Pin it in the position to be installed, and pay attention to the balance on both sides. Don't go up and down once. After installation, look at the front and back to ensure the correct position. At this time, we will be ready to sew.

3. To sew the invisible zipper, the presser foot of the sewing machine needs to be replaced. The invisible zipper has a special presser foot. When installing the invisible zipper, the presser foot must be replaced. We remove the old presser foot and replace it with the presser foot of the invisible zipper.

4. At this time, put the fabric on the sewing machine and press your feet next to the edge of the zipper. Remember, be sure to sew it on the side so that you can't see the zipper. You can push it there by hand if necessary. Sew one side first, then the other side. Novices may need to practice a few more times.

5. After sewing. Try the front and back of the zipper to see if it is smooth. Besides, you shouldn't see the zipper from the front. This is qualified. Practice makes perfect. After a few more installations, you will be familiar with its process and the effect will get better and better.