The whole process of manicure step operation

The whole process of manicure operation is as follows:

1, repair a

Trim your nails with a third of the rubbing strip and make them look good. The finishing of A is the beginning of all manicure operations. A's finishing looks good, and then coloring will have a different effect.

Step 2 remove dead skin

Apply a layer of softener to the dead skin at the nail root, then gently massage, slowly guide the dead skin to the nail root from top to bottom with a steel push, then find a support point, and then cut off the dead skin and barbs with a dead skin scissors (note: beginners should not over-trim).

Step 3 polish the nail surface

In the order of side-front-side, first polish the rough surface with a sponge, and then polish the nail surface with a fine surface (note: polish the root and sides of the nail, which is the key reason why your nail will fall off in less than two days).

Step 4 clean the nail surface

Clean the nail surface and nail groove with a dust brush, and then clean the nail surface with 75% alcohol (note: the nail surface must be wiped clean with grease, which will lead to uneven painting).

5, primer+edging

Take a small amount of glue, first wrap the nail edge with primer backhand, then apply primer on the nail surface, and brush it on the nail surface several times repeatedly to make the primer and nail surface more compliant, and immediately illuminate for 30 seconds (note: wrapping is necessary, otherwise the back of your nail edge will become warped, which is one of the reasons why your nail will fall off quickly.

6, colored glue+wrapping.

The operation steps are the same as the fifth step. Note: The first coating glue only needs to cover the edge, and the second coating glue does not need to cover the edge. Generally, apply colored glue twice (depending on the color you want, up to three times). Turn on the lighting for 60 seconds for the first time and 60 seconds for the second time.

7. Sealing coating+wrapping

Steps are the same as above. First, wrap the front edge of the nail with a sealing layer, then coat the sealing layer on the surface of the nail and dry it.

8. Erase complete

Wipe with quick-drying water or alcohol with concentration above 95% from the tip of nail to the root of nail (cotton swab or cotton pad can be used).

Harm of manicure:

1, systemic side effects

The quality of nail polish used for manicure is uneven, which may contain some toxic and harmful substances, which can enter the human body through the skin or respiratory tract, causing adverse effects on the respiratory, heart, liver and kidney systems of the human body. Nail polish may also contain carcinogens such as phthalates, which may cause cancer after long-term contact.

2, accelerate skin aging

After applying nail polish, you need to irradiate blue light. Blue light is ultraviolet light. Put your finger in and shine for about 30 to 40 seconds. Ultraviolet rays have strong penetrating power, which may directly penetrate the dermis, destroy collagen fibers and elastic fibers, and cause skin aging and wrinkles. Often exposed to such light, hands or feet are prone to blackening and aging.