How about thin tiles?

Interpretation of thin-plate tiles Thin-plate tiles are thinner and lighter than ordinary tiles, but their hardness, wear resistance, surface gloss and stain resistance are not compromised at all.

The paving guide rail is thinner and easier to cut after pasting.

Paving technology

Ultra-thin brick is not paved with cement mortar, but with a tile binder as an auxiliary material to combine the tile with the attached surface.

After the completion of paving, the overall thickness is only 1.5 cm, while the thickness of ordinary tiles paved with cement mortar needs to reach 4 to 5 cm.

Tile cutting Some ultra-thin tiles don't even need to be cut with a tile cutting machine, but can be cut with an ordinary cutting knife, with little noise and dust.

Traditional tiles, especially large ones, are prone to warping. Thin-plate tiles have certain toughness. When the shop is stuck, there is a warping place, so you can gently press it with your hand.

Four advantages: 1, long service life and easy care.

Although the surface hardness of thin-plate tiles is slightly lower than that of ordinary tiles, it is enough to meet the requirements of use.

It has a long service life, is nonflammable and does not absorb or emit sparks.

Excellent wear resistance and corrosion resistance make thin-plate tiles low in maintenance cost and easy to clean.

2, reduce the fence, low burden

Because thin-plate tiles are lighter than ordinary tiles, they can effectively reduce the load on paved walls and floors.

Especially in high-rise buildings, stairs are not easy to settle and deform.

Thin and light features can also reduce installation accessories and labor costs.

3, the floor heating effect is good

In the space where floor heating must be used, the floor heating effect is better, the energy consumption is less, and the space temperature rises faster because of the thin glue layer and the thin material of the thin tile itself.

4. Suitable sanitary places

The maximum specification of thin-plate tiles produced by some manufacturers can reach 1800×900 mm, and its advantages of being large, light and thin simplify the complicated paving process and the number of mortar joints, greatly reducing the possibility of bacterial reproduction, and can be used in various sanitary places such as bathrooms and toilets.