How to deal with the outer bark of tree roots

1, 1 cubic meter of bark (about 0.5 tons), 25 kilograms of dry chicken manure or livestock manure, 5 to 10 kilograms of urea or thiamine; the right amount of lime (about 0.5 to 1 kilograms); a kilogram of bark fermentation agent. It is forbidden to use materials under 0.2 cubic meters or weighing less than 200 kilograms as a test;

2. Mix dry chicken manure or livestock manure and urea and thiamine in the bark material, and reduce the carbon to nitrogen ratio (C/N) to less than 40;

3. Because the bark of coniferous trees contains substances with high acidity, it is necessary to add an appropriate amount of lime to adjust the PH to 5 to 5.5;

4, Sufficient watering, buckle film, cover (smother) heap 2 ~ 3 days, so that the moisture content of 50 ± 5% between;

5, Jinbao Bark Fermentation Additives 1 kg plus 2.5 kg of rice bran diluted and mixed to formulate the incremental bacterial agent. Spread the mixed incremental bacterial agent evenly in the mixing of the bark mixture, inverted a few times, so that the bacterial agent is uniformly adsorbed to the fermented material.

This process is called "inoculation". After inoculation, the material is piled up into a large pile, covered with mulch, and left naturally for 6 to 12 hours for pretreatment, to promote the bacterial effect of bacterial agent, so that Jinbao Bark Fermentation Aid is fully adsorbed into the material to be fermented.

Extended information:

Leaves can be used to make some hollowed out paintings with a large leaf or a number of leaves or to record the text of some things that are considered important on it. Then the table mounted, hung on the wall as a decorative painting or placed on the desktop as ornaments Tree roots You can collect some old and relatively large roots according to the favorite shape to transform into some such as wooden chairs, wooden stools and so on.

1, root art production after the molding, to make up for the shortcomings of the treatment of the latter process, can be partially connected or multiple combinations.

2, after the molding of the combination, the general use of wood glue joints, can also be drilled with wood screws, and then filled with glue, firm and reliable.

3, lacquer; before most of the varnish antiseptic or on the floor wax method, such as to achieve the effect of antique, available paint chips after soaking the surface of a layer of brush, to be dry and then use the varnish photoluminescence or wax.

Baidu Encyclopedia - Bark