How to connect the wires to make the electric hoist run normally?

1, line 2 is connected to the power supply, that is, the black and brown line. For example, the remote controller is connected from 380V to 380V and from 36 V to 36 V. Don't connect it wrong, it will burn out the transformer in the remote controller. The working voltage of the remote controller is just above the shell of the remote controller.

Orange power supply, this power supply has the same working voltage as the contactor on the crane. The red wire is connected to the main contactor coil.

Yellow and green wires are connected to the upper and lower contactors, green and blue wires are connected to the east and west contactors, and gray and white wires are connected to the north and south contactors. Pink is the backup line, so leave it alone.