How to make a baby carrier?

Abstract: The use of baby straps has enabled more and more parents to rescue their hands from holding their children. But there are too many kinds and brands of baby carriers on the market. If you don't know how to choose, you might as well make a baby carrier yourself! The manufacturing process of baby carrier is very simple. The following small series will bring you a manual tutorial on baby suspenders, so learn it quickly. Tutorial on Handmade Baby Straps

Manufacturing method of baby carrier 1:

Materials: surface cloth, interlining (length 145cm, width 50cm), scissors, tape measure, needle and cotton thread.

Note: the surface cloth is thick corduroy cloth, and the lining cloth is pure cotton cloth. The length of the belt can be increased or decreased according to the size of the mother and the baby. Mothers who often buy cloth will know that the width of cloth is generally one meter five, one meter and other different specifications. Pay attention to the width when you buy it. If the fabric is 1.5 meters, you can buy half a meter.

Steps:

1. Cut two pieces of cloth (length 145cm, width 15cm) from the surface cloth and the lining cloth.

2. Fold the cut surface cloth and lining cloth in half (the width of the folded cloth strip is 7.5cm), fix it with a bead embroidery needle, and sew the two sides to make two cloth strips with the same length and width.

3. Place the two belts crosswise. Sew the overlapping parts together with cotton thread.

4. Fold the two ends of the two belts into a cross and sew them with cotton thread. (Add diagonal lines to reinforce the four sides of the seam. )

5. According to the distance between two adjacent intersecting belts, cut out two triangular pieces of cloth (one for surface cloth and the other for lining cloth), roll the raw edges inward into inverted triangles and sew them on the two adjacent belts.

6. done.

Method for making baby carrier 2:

Materials: pure cotton cloth, lace, sewing machine, needle and thread.

Steps:

1. Cut the cloth into two pieces, each about 16cm wide. If you can't grasp the length of the belt, leave it longer first, usually around 150cm. Tall babies need to be longer.

2. Fold the cloth in half and sew it on the reverse side.

After the car is finished, turn the cloth to the front with the help of a ruler.

4. After the cloth is turned over, turn a lace on the edge of the cloth, and the other cloth will be turned into a belt by the above method.

5. After the car is finished, the two belts cross, and the cloth is thicker at this time.

6. Cut a small piece of cloth, fix the sidecar, and leave a small mouth at last.

7. Turn the cloth from the small mouth to the front and add a lace car.

8. Put the sewn triangle piece on the newly made X-belt and sew it better than the good position.

9. After sewing, the interface is also cruciform, which is stronger than the length. If it is long, it can also be folded and stitched directly, and then released when the baby is older.

10 So the baby carrier is sewn!

Method 3 of making baby carrier:

1. Fold a piece of cotton cloth into a rectangle with a length of about 40 cm and a width of about 30 cm, and sew it on four sides, or sew two pieces diagonally, which is relatively flat. (Note: The size of cloth is not limited. Small pieces of cloth are folded into two layers, and large pieces of cloth are folded into four or more layers. The more layers, the thicker, but the corresponding air permeability will also become worse. )

2. Make two long belts at least 1m long and at least 5cm wide, and sew them on the two corners of the rectangle. (Note: The belt should be at least 5cm wide. According to the principle of "the larger the contact area, the smaller the pressure", it is less painful for adults; Similarly, the belt can also be folded in multiple layers, which will also reduce the pressure. )

3. Make two rings with the remaining cloth and sew them on the two corners under the rectangle, so that the cloth belt can pass through the rings smoothly. In this way, the simple baby carrier was successfully made.