Anyone know the decorating tools, what are the specifics, can you say in detail?

Confucius once said, "If you want to do a good job, you must first sharpen your tools." A person who does handwork or craftsmanship, in order to get the job done and perfected, should first get the tools ready. As an experienced and professional master, remodeling tools are essential. At this stage of the renovation construction process commonly used tools if you have not yet used? Hurry up to collect!

Power tools, a complete list of commonly used power tools for renovation and construction

Part 1: Introduction to the basic tools and structural demolition tools

There are a lot of tools that need to be used in the process of renovation and construction, and the tools are constantly being introduced, so it is unlikely that you want to list all of the construction tools all into one article. And what Lao Wang wants to do is, according to the general process of construction, will involve some basic tools introduced to you. Then first, we will recognize some basic distance level and other measuring tools and decoration of the first step that is the structure of the demolition of the tools that need to be used.

One, the basic tools of decoration

The basic tools of decoration are first introduced, because these basic tools are basically used in every construction project. The next construction project, will not repeat these tools.

1, the decoration of distance measuring tools

In the whole process of decoration, the most commonly used is the distance measuring tools. From the ordinary tape measure, ruler, ruler, vernier calipers to the higher technology laser rangefinder, a very large variety, and new rangefinding tools continue to appear. Here is a very recommended laser rangefinder, the function is really very powerful, not only can measure the distance, but also can measure the area, volume, hook, continuous, storage, addition and subtraction. Some of it works really very convenient!

2, horizontal and vertical inspection tools

Decoration, horizontal and vertical as well as angular inspection tools are also very critical and commonly used tools. Commonly used to check whether the wall is horizontal and square, in order to facilitate the construction of the next step, to ensure the effect of the construction of the decoration. Commonly used horizontal and vertical inspection tools are hanging line, vertical inspection ruler, laser level and inside and outside the right angle inspection ruler.

The common laser level meter on the market are used in the domestic ordinary green light, not only low precision, scattered light and stray light. Seriously affect the efficiency of the decoration masters. Today to share with you a national light of the laser level meter brand - "draw Pu huepar". The light source is all introduced into the German Osram, huepar this brand is very popular with foreigners, Amazon and other foreign online shopping platforms are the top three sales! Currently has been exported to more than 30 countries and regions around the world. To know the requirements of foreign measuring instruments is very strict, especially in Germany and Japan have gained a good reputation.

Domestic Tmall, Jingdong, search for Eura that can be

3, marking the record tools

Some tools, although small, but really can not be ignored, like the decoration of the marking of the record tools that are often needed. Common marking tools are pencils, color pens, sticky notes, books and so on. These tools believe that we are very familiar with, here will not be described in detail.

Two, structural demolition tools

If the owners of the original structure of the house is not particularly satisfied, want to carry out some structural transformation, this time you need to use some tools to better structural demolition.

The common tools used in structural demolition and remodeling are hammers and impact drills. Hammer is the older type of wall demolition tool, usually taken from top to bottom, more time-consuming and laborious. While using an impact drill to tear down walls, it is more time and labor efficient. When tearing down a wall, the two tools are typically used in tandem, with the drill removing the siding and the hammer knocking out the bricks.

Part2: Introduction of water and electricity construction tools

After the structural demolition is completed, it is time for the water and electricity remodeling stage. Water and electricity remodeling belongs to the hidden project, the importance is very high. And to do a good job of plumbing and electrical renovation, it is very critical to choose the right tools. Plumbing remodeling stage tools can be divided into two categories, one is the remodeling construction tools, the other is the plumbing acceptance tools. Plumbing acceptance is a very critical step, absolutely can not be missing, so acceptance with the following tools will also be described in detail.

A, plumbing and electrical remodeling construction tools

1, grooving tools

The first step in the construction of plumbing and electrical remodeling is based on the design drawings, in the wall, the ground to place the pipe groove. First of all, the use of pens, tape measure, etc. to draw the groove line, and then use the grooving tool to open the groove. There are a variety of grooving tools, including plumbing and electrical grooving machine is a more professional one, can be opened at one time, different angles, width, depth of the line groove, and no other auxiliary tools. In addition, grooving can also be used to drill grooves, but the grooves are generally rougher.

2, water construction tools

Water construction is about to be connected to the water pipe line, paved. The process of water pipe pipe cutting, cutting is recommended to use a special pipe shears, broken pipe can make the pipe axis vertical, burr-free; in addition, also need to use PPR heat fusion machine, fusion machine can be heated through the pipe and fittings, will be connected to the pipeline.

3, circuit construction tools

Circuit construction, you need to use the tools, first of all, cutting wire tools, mainly insulated handle wire strippers; in addition, you also need to use to bend the pipe with the spring, threading steel wire, and electrician's knife.

Two, plumbing and electrical renovation acceptance tools

1, water acceptance tools

Water renovation is done, be sure to do the water pipe pressure test, test whether the water pipe can withstand a certain range of pressure, which is to ensure the reliability of the late water pipe connection common method. The tools used are mainly pressure pumps.

2, circuit acceptance tools

Circuit remodeling acceptance, you need to use a resistance meter to check the circuit whether there is current, the presence of current indicates that the use of normal. You can also check the resistance value of the circuit to determine the use of the general insulation resistance value of each circuit is not less than 0.5 megohm for normal.

In addition, the weak electricity also needs to be tested to check whether each line is smooth. Use a network cable tester to connect each cable and check the screen display to see if the cable is connected incorrectly.

Part3: carpentry construction tools

Many people will be in the living room decoration wood keel ceiling as well as have some furniture making projects, then carpentry construction in addition to some basic measuring distance, drawing lines of tools, but also need to use what tools? Here together to see.

1, carpentry cutting tools

In the carpentry construction process, the first need to cut the material to facilitate modeling. Cutting tools are mainly cutting table with saw blade, handheld cutter and miter saw.

In the woodworking process, the material may need to be smoothed in addition to being cut, which requires a planing tool. A planer is an older woodworking tool that can plane the boards straight. In addition, chainsaw blades can also play a part in planing.

3, carpentry drilling tools

In the wood keel ceiling decoration process, often need to drill holes in the ceiling top, used to hang components, then you need to use the impact drill. And in the plate and other materials above the drill, can be used to drill.

4, carpentry nailing tools

Common tools in the construction process of carpentry and nailing tools. In the construction site, I common two kinds of nailing tools, one is the usual hand hammer, the second is the code nail gun. The use of hand hammer nail nail size is larger, while the yard nail gun nail nail size is smaller.

5, paint brushing tools

Wood products made, generally need to be painted with wood paint. Wood paint painting with the help of some tools. According to the use of different methods of painting, the choice of tools are also different.

Wood varnish can be applied with gauze, brushes, spray guns, and rollers, depending on which is the most appropriate tool for the situation.

In addition, wood paint construction process, more commonly used filter and sandpaper. The filter is used to filter impurities in the wood paint, and the sandpaper is used to sand the wood surface.

Part4: tile laying tools

Home improvement process, after the completion of the construction of water and electricity, tiling and carpentry can enter the field, both can be at the same time into the field. The main project of tiling construction in home decoration is laying tiles and so on. Here we will mainly look at some of the tools that need to be used in the tile laying process.

1, tile and mortar loading containers

Tiles in the paving before, in accordance with the usual practice, need to be placed in the water to soak for a period of time, to prevent the tiles in the paving of the water fall. Soak the container can be a bucket, or a larger basin. At the same time, it is also necessary to prepare the cement bucket used to bear cement mortar, convenient construction.

2, tile cutting tools

Tile size is fixed before use, and in the actual paving process, the need to adjust the size of the size, as well as the need to cut out the tiles on the water pipe into the drainage holes. So this time you need to use the tile cutting tool. I ran the site when I saw the construction workers used cutting tools are mainly two kinds, one is an electric cutter, the other is a manual cutting knife.

3, plastering tools

In tiling, the need for mortar to the back of the tiles, this time the need for mud knife tool. Used for smearing and smoothing to fill and pay for the mud plaster. Mud knife products more, masonry in the construction process may be used in conjunction with the use, but also can choose one of its use.

4, leveling tools

Tile in the paving process, laser leveling tools are very critical. Thus, although mentioned earlier, but here again to show the tiles in the paving process to be used in the laser leveler.

5, other tools: rubber hammer + plastic sheet

Tile paving to the wall, in order to make the distribution of mortar more uniform, sticky wall is more solid, as well as to avoid the emergence of drums and other phenomena, you need to use a rubber mallet will be knocking the tiles tightly, knocking the flat solid. In addition, the tiles need to leave a seam, generally used between the tiles clamped on a small plastic sheet for separation, can effectively avoid the tiles sliding caused by leaving a seam disappeared.

Part5: wall painting and wallpaper tools

Many people's home wall decoration is most often used in two ways of decoration, one is wall painting, the second is wallpaper. Here's a look at the wall painting and wallpapering what tools you need to use.

1, the wall grass-roots processing tools

Walls in the wall paint and wallpaper before, need to advance the wall grass-roots processing, including leveling and leveling. The tools used are generally mud knife and some leveling tools.

2, wall painting tools

Generally commonly used wall painting methods are three: brushing, rolling, spraying. When decorating, after measuring the advantages and disadvantages of various painting methods, according to their own preferences to choose the most appropriate painting method. From there, choose the appropriate painting tools.

In addition, the wall painting construction process, more commonly used and color separation paper and sandpaper. Separate color paper is used to protect hardware and wood devices, in addition, the need to spray different colors of paint, can also be used to separate the protection. Sandpaper is used to sand the wall to reduce the wall brush marks, make the wall more smooth.

Two, wallpaper paving tools

Wallpaper paving is relatively simple, the first need to brush the wallpaper base film, the tools used can make the roller brush or other tools. Then you need to use the basic tools to measure the size of the wallpaper cutter to cut the wallpaper. Then use a brush to brush the wallpaper adhesive on the back of the wallpaper. Finally, paste the wallpaper to the wall.