What is the traditional fluorescent tube bracket mounted led light tube transformation method

Traditional fluorescent tube bracket to install led lamps what transformation method:

1, first remove the light tube bracket on the ordinary fluorescent tubes and stored, remove the bracket on the decorative mask, and then depending on the original fluorescent tubes used in the ballast form.

2, the modification of the first light tube bracket on the glow S removed, and then the bracket within the inductive ballast terminals A, B on the two power wires lifted, and then lifted the two wires for shorting? Use electrician insulating tape to wrap it.

3, in order to prevent the modified light tube bracket mistakenly installed on the ordinary fluorescent tubes, should be in the bracket inside the obvious position of the label, indicating that "the lamp basin is only suitable for the installation of LED fluorescent lamps", after checking that the wires are connected correctly before you can install the decorative mask, the LED fluorescent tubes suitable for the installation of light tube bracket to the light. The LED fluorescent tube will be mounted on this light tube bracket and energized to light up.

4, the modification of the light tube bracket to the electronic ballast terminals on all wires lifted, and then the original connection of the electronic ballast A, B terminals of the two wires connected to the bracket power input "L", the original connection of the electronic ballast C, D terminals of the two wires connected to the bracket power input "N" after the two wires connected to the two wires connected to the bracket power input "N". The two wires connecting the C and D terminals of the electronic ballast are shorted together and connected to the "N" on the power input of the bracket

5, and finally wrapped with electrician's insulating tape respectively. In order to prevent the modified light tube bracket mistakenly installed on the ordinary fluorescent tubes, should be in the bracket inside the obvious position of the label, indicating that "this lamp basin is only suitable for the installation of LED fluorescent lamps".

6, after checking that the wires are connected correctly before installing the decorative mask, the appropriate LED fluorescent tubes installed on the light tube bracket to power on the light.

The advantages of LED fluorescent lamps:

1, energy-saving: 80% more energy than traditional fluorescent lamps.

2, green: no ultraviolet light, infrared light and other radiation, does not contain mercury and other harmful substances, the lamp body recycling pollution-free.

3, long life: normal use up to 50,000 hours or more.

4, no strobe: LED constant current work, effectively reduce the LED light failure, start fast, no flicker, eye protection.

5, easy to install, the installation of the original fluorescent lamps will be removed for LED fluorescent lamps, and the ballast and glow starter removed, so that 220V AC mains directly to the LED fluorescent lamps can be added to both ends.

Scope of application:?

1, suitable for most indoor lighting applications, such as: home, hotel, shopping mall, office, school, parking lot

Warehouses, factories, supermarkets, passages, corridors and advertising boxes and other indoor lighting.