How to connect two network cables?

Question 1: How to connect two network cables into a cable connector? Cable connectors are sold in 5 yuan, electronic markets or computer city stores selling router products. It is a small box-shaped thing, and its length, width and height are about cm*3cm*3cm of the valve.

Question 2: The network cable is not long enough. What is used to connect two network cables? Terminal, 3M is better. Communication engineering equipment and professional network engineering companies sell them.

Question 3: Can two network cables be connected? The network cable is direct, which is sold in computer city, and it costs about 2 yuan each.

You can also peel off the inner core of the network cable and connect it directly according to the color. Other small tubes that can be insulated are covered on the outer skin of the telephone line, which can also be used. The loss is negligible, but it is not beautiful. If you use docking, you must ensure that both ends are crystal heads, otherwise you can't connect without tools. If there is no crystal head at one end, you can go to an electronic product store to buy a module, and it only takes about 5 yuan to connect the cable directly according to the color marked on it.

Question 4: Two network cables are directly connected. How to connect them? It is best to connect the two ends with crystal heads, otherwise the effect will be greatly reduced. If you had access to the internet before, IP and gateway should be out of reach, and it won't change just because your network cable is broken, hehe.

Question 5: How to connect two network cables into a network cable connector? It's worth 5 yuan. Router products are sold in electronic markets or computer cities. It is a small box-shaped thing with a length, a width and a height of about 4cm*3cm*3cm.

Question 6: How to connect two cables with different colors? If there is a crystal head, it is strongly recommended that you cut your own connection. Just buy two dollars and plug them in at both ends. If you don't have a crystal head, you have to pick it up yourself. I suggest you take a watch and hit it. Don't be blind about the color, because the first one is the regular color of the network cable, and the second one doesn't know what it is.

Question 7: Can two network cables be directly connected like wires? Yes, it depends on what kind of equipment you need to connect.

If the network cable is broken or not long enough, you can directly add color.

If you are worried about the problems mentioned by other enthusiastic netizens, you can use an electric soldering iron to solder it and then wrap it with insulating tape, which can solve the problem of poor contact.

* * * We must pay attention to the problems mentioned in ZY 419. The transmission distance of twisted pair is 100 meter, which cannot be exceeded. There must be network devices in the middle, such as switches, routers, hubs and hubs mentioned in lm3200. Because this is the reason for the attenuation of electrical signals.

Question 8: How to connect two network cables? The straight head is not bad, but the crystal head you use is not good. It is suggested that if the network cable is long enough, it should be wound around the straight-through head first, and then fixed with adhesive tape to prevent looseness when it is confirmed that the Internet can be accessed normally. This may be a solution. In addition, if you want to cut off the head of the crystal and directly connect it, it's not impossible, just remember to align it according to the original picture? The winding direction should not be too long as possible. If it really doesn't work, manually adjust the speed of the network card to 10M full duplex. Try it first. Good luck!

Question 9: How to connect two network cables together? Just use a connector. I used to use it like this, hehe.