How to punch holes in the bathroom tile wall without breaking the tile?

1, determine the drilling position. The first step in drilling ceramic tiles is to find the correct drilling position. It is very safe to avoid damaging the waterline when drilling, so stick adhesive tape on it.

2, choose the right bit and speed regulating electric hammer. Glass drills are recommended here. This kind of special drill for drilling ceramic tiles must be bought at the decoration hardware store. It would be better if it were all porcelain. It will be much more convenient to operate the speed regulating electric hammer. Start drilling holes at low speed on the surface of tiles, and then accelerate after entering, so that tiles are not easy to break.

3. Then start drilling. Draw the same diameter, first drill holes in the waste tiles.

4. When drilling holes, water should be sprayed continuously, because the wall tiles have strong water absorption, and the temperature will rise when drilling holes, which will cause the tiles to crack. After spraying water, aim the hole in the waste tile at the hole in the wall, aim the electric hammer at that point and slowly force it through the tile. After opening a small hole, you can remove the waste tiles and then drill a hole in the wall.

5. After drilling the hole, install the expansion pipe, and then start fixing what you want to install.