How to connect the main line with the hand lever

How to connect the main line and the handle:

1, first tie a fast knot at one end of the main line and make a coil;

2. Pass the folded main line through the coil and install a space bean from the folded position;

3. Fold the main line into a horseshoe knot and put it on the slightly soft braid of the pole;

4. Lock the space bean.

When fishing, it is inevitable to break the line and go astray. Not only the secondary line will be broken, but also the main line will be broken. The main line is mostly broken at the pole, especially when encountering big fish.

There are many reasons for disconnection, so I won't discuss it here. Only talk about the main causes and countermeasures of the slight fracture of the main line at the pole.

Where the knot is tied, the more tightly it is pulled, the more serious the thread is injured and the easier it is to break. This is often referred to as the low tensile strength of nodules. To put it bluntly, it is because of the fast knot that the main line is easy to break at the fast knot.

As you can imagine, to solve the problem fundamentally, we must avoid tying fast knots on the main line.

When the main line is pulled hard, the pulling force is transferred to the slightly soft braid of the pole, but it is basically not transferred to the dead joint, especially when the main line is not too thick and hard. Even if the tension is great, most of it will be transmitted to the soft braid and a small part will be transmitted to the dead joint, and it will not break.