How to use the remote control of Chigo instant water heater

1. Plug in the power supply and the water heater is in standby state.

2. Install the battery on the remote controller, press the display button, and wait for E7 to appear on the display screen of the remote controller.

3, 3 seconds, press the confirm key of the remote controller for 6 times continuously, and the remote controller will automatically enter the code checking state, and the hot water output of the remote controller will display 000, flashing twice per second. JSQ26/32-TFLA remote controller will press the temperature-up key to check the code.

4. Immediately press the priority key of the water heater for 6 times within 3 seconds, and the water heater will automatically enter the code checking state. The hot water output on the display screen of the water heater will display 00, flashing twice a second.

5. After successful coding, the remote controller will automatically exit the coding state, and the envelope icon of the remote controller will be displayed for 5 seconds.

6. After the water heater is coded successfully, it will automatically exit the coding state, and 00 will be displayed at the hot water outlet of the water heater.