Fishing inflatable boat rubber boat which is better?

What kind of inflatable boat is good for fishing? The following is a detailed introduction:

1, Haidilao

Use inflatable boats and rubber boats. The ocean is the most dangerous water area with the biggest wind and waves, so it is very important for the safety performance of ships. Big waves can capsize the ship, so the ship must have certain wind and wave resistance. I recommend using inflatable assault boats to go fishing. The assault boat has a thick buoy and a V-shaped inflatable keel, which will make the boat more stable and will not overturn it if it is shaken badly. Besides, it is made of materials. The thickness of the assault boat is 0.9- 1.2, and reinforced polyester fiber weaving is added inside to prevent damage and air leakage when hitting the rocks. The assault boat can also be equipped with a high-power propeller to quickly transfer in an emergency.

2. Fishing in complex waters such as rivers

I recommend the assault boat, an inflatable boat, to fish in the waters. Although the river is not as windy as the ocean, it will also produce huge waves when large ships pass by, so it is also very important for the stability of ships. Complex waters refer to; For example, in rocky and thorny waters, ordinary inflatable boats are easily punctured by these, and only assault boats are not afraid of being punctured.

3. Fishing in reservoirs and lakes

This kind of water is calm, there are no strong winds and waves, and the stability of the ship is not high. We can choose inflatable boats with nets. Generally, the material thickness of the net boat is about 0.7mm, and it is a medium-sized cruise ship, which is comfortable to ride and weighs more than ten kilograms. It is an ideal product for long-distance travel.

4. Economic category

Many people can't choose more expensive inflatable boats and rubber boats because of economic problems. For example, inflatable boats with nets need more than 500, and assault boats need more than 1500. They can only choose ships below 300 yuan. This kind of boat can be used, but it can only be used in waters without danger, because it is thin, easy to puncture and leak, and very unstable.

Expanding knowledge: repair methods of inflatable boats

1. First, find out the air leakage point on the hull. When inflating, use a rag to stick soapy water evenly on the hull, and bubbles will appear in the leaking part. According to this clue, we can find the leak.

2. Wash the stains around the air leakage point with alcohol, and then dry them with a towel. Ensure that the air leakage point is clean and dry.

3. Use the special glue and patch attached with the ship, and cut the patch according to the area of the air leakage point, paying attention to be larger than the air leakage point.

4. After the patch is cut, apply the glue evenly on the patch and around the air leakage point in turn with a brush, wait for about 3-4 minutes and then apply it twice at a time.

5. Stick the patch on the air leakage point, blow it with hot air from a hair dryer, then press it with a smooth object and let it stand for 8 hours before use.

6, inflatable boat rubber boat after repair, before use, should be filled with air for more than two hours before use.