How to install the radiator correctly?

Correct installation method of radiator

1, laying pipeline

After the installation position of radiator is determined, it is necessary to design the pipeline laying line, usually in hidden places such as ceiling and skirting line. The laying of exposed piping should try not to affect indoor decoration or occupy too much space.

2. Install radiator

Place the radiator smoothly, measure whether it is installed smoothly with a level gauge, then connect the valve joint with the valve at the inlet and outlet, and reinforce it with a pipe wrench after checking it is correct.

Step 3 install a wall-hung boiler

When installing the wall-hung boiler, it should be separated from the open wire and electrical equipment, that is, the distance between the wall-hung boiler and the gas meter and gas stove should exceed 300 mm

4. Stress testing and customer acceptance

Don't forget the final test and acceptance. The construction personnel did not run, run, leak or drip. During the pipeline stamping test, it can only be accepted after being checked and confirmed by the customer.

Villa master provides you with local architectural policies, architectural drawings and villa design drawings;

Villa appearance rendering service, you can choose from thousands of red-hot drawings: www.bieshu.com? bdfc