What is the installation height of the ceiling fan? How to install ceiling fan

Everyone knows about fans, right? Fans can make people feel cool in hot weather. There are many kinds of fans, electric fans, electric fans. Everyone should know that electric fans are very common and popular in life. Basically every family has an electric fan. Ceiling fans are rarely used at home. Generally speaking, it is used when there are many people in the office or school. A ceiling fan is a fan hanging on the roof, which can blow people away. The following small series will introduce the installation height of ceiling fans for everyone!

What is the installation height of the ceiling fan?

The installation height of ceiling fan should be appropriate. Generally, the blades are 2.5~3m from the ground and 400~500mm from the ceiling. Too close to the ground is easy to hurt people, and too close to the ceiling will affect the airflow behind the blades and reduce the air volume.

How to install the ceiling fan?

Installation steps of ceiling fan 1, installation preparation:

(1) It is safer to turn off the power supply. Turn off the power supply at home, and then start installing ceiling fans.

(2) The installation position of the ceiling fan is generally the center point of the house. You can draw two diagonal lines on the roof of the living room, and the intersection is the center of the house. Then directly fix one side of the new junction box of the ceiling fan on the keel nearest to the center point.

Ceiling Fan Installation Step 2: Install the junction box

Supply power to ceiling fan and lamp (if applicable) at the same time, and use a switch to control the switch; The ceiling fan and/or lamp are powered on at the same time, and the switch is controlled by the RF remote controller included in the ceiling fan accessory or purchased separately.

Ceiling Fan Installation Step 3: Connect the power cord

If you use # 14-2 or # 12-2 wires, please follow the standard color coding scheme to connect the wires to the ceiling fan: white wires are connected to the white wires of the ceiling fan, bare wires (or green wires) are connected to the grounding/green wires of the ceiling fan, and black wires are connected to the black wires and blue wires (if any) of the ceiling fan.

Ceiling Fan Installation Step 4: Assemble the ceiling fan.

Assemble the blade and bracket assembly together, and then connect the blade and bracket assembly with the motor one by one. At this time, it is recommended not to act alone, which will be much faster.

Ceiling Fan Installation Step 5: Install the ceiling fan.

(1) Install the hanger on the box with screws and locking washers, then screw the assembled ceiling fan onto the mounting ring and cover it on the fan motor housing. If your ceiling is high, you may need to add a hanging pipe.

(2) Then turn on the power supply and connect the power cord with the control switch.

I believe that after reading Bian Xiao's introduction, you should know that the lower the installation height of ceiling fans, the better. Of course, the height is relative. Generally, the ceiling fan is equipped at the time of purchase, and the height is fixed, because the length of the pole for fixing the ceiling fan is fixed. If you feel that the height is inappropriate or too high to be repaired, you can customize the fixing rod. In addition, it should be noted that it is best not to move casually after the ceiling fan is installed, and the installation of the ceiling fan should be fixed, otherwise it will hurt people if it falls!