Yizhan router pairing tutorial

Yizhan router pairing tutorial is as follows:

1. Connect the device to the wireless network of the TP-Link 1900 easy-to-develop router to be connected.

2. Open the wireless network settings on the device and find the network name of the router.

3. Select and connect to the network name of the router. After the connection is successful, open the Web browser on the device and enter the IP address of the router.

4. Enter the user name and password to log in to the management interface of the router. In the router management interface, find and select one-click connection.

5. Follow the instructions on the screen to set up one-button connection.

Knowledge expansion:

The router easy version is to connect multiple routers of the same model or different models with a simple button, which does not require professional knowledge and configuration, solves the problem of insufficient wireless coverage of a single router, and makes it easier to expand wifi.

An obvious router can also be connected by a network cable. The specific operation is to connect the network cable to any network port of two obvious routers, and then press the "obvious" button on the two routers within 2 minutes to complete the networking.

If it is two ordinary wireless routers, you need to log in to the setting interface of the second router and set some columns before you can use it.

Precautions for Routers

All electrical appliances will generate heat when they are running, and routers are no exception. Although the transmission power of the router is very low, if it is not turned off for a long time, the heat will accumulate slowly, and the work efficiency will be affected when the temperature reaches a certain level.

Routers have been working under high load, and accessories are prone to aging. Even 100M optical fiber may become a "turtle speed", leading to various problems such as network delay and slow network speed.

Disadvantages are as follows:

1, first of all, the internal workmanship is very general. The antenna is an omni-directional antenna with three PCB boards. I'm worried about serious interference and crosstalk.

2, the heat dissipation is general, it is a plastic shell PCB board, and the back is added with a heat dissipation aluminum shell.

3. Too light weight makes the router feel a little complacent. Usually connecting a router with three ports is like one side of the socket is inclined.

4. The signal is very weak. If there is a wall above the suite, the signal will be obviously attenuated.

5. The number of interfaces is slightly less, with only three interfaces.