Video course of oil forklift operation

1, the fuel forklift is an endless gearbox, with three gears (forward gear, middle gear and reverse gear), the gear handle is located under the left side of the steering wheel, and there are three pedals on the body floor. There are two kinds of power transmission pedals (separated) on the left, two kinds of tire brake pedals (with air brake or oil brake) in the middle, and an engine accelerator pedal on the right. The engine is rear, and the direction is rear steering (steering is rear). The torque transmitted by the CVT is the front drive axle, and there are four hydraulic control handles on the right side of the steering wheel.

2. Horizontal control handle with left fork (which can control the left fork to move left and right); There is a fork front and rear control handle (which can control the fork front and rear); Lifting control handle with fork (function of controlling fork height); Transverse control handle with right fork (which can control the left and right functions of the right fork); The position of several handles will change according to the vehicle model, and the handle control valve is a two-position one-way valve.

It seems easy to start the vehicle. In fact, it is very important to release the handbrake fork, press the clutch to engage in forward or reverse gear and fast or slow gear, and gently release the clutch. Tap the steering wheel of the steering motor forklift at the back with a small interval.

4. When the vehicle is driving in front of the goods, step on the clutch to make the forward gear in neutral, then release the clutch, control the lifting rod to lift to a suitable position, then step on the clutch to hang the forward gear, and gently release the clutch, and the vehicle will move forward slowly with the lifting rod to adjust and insert it into the middle of the bottom of the goods. Put the clutch in neutral to control the tilt lever to rise to a suitable height, and put the clutch in reverse to drive smoothly.

5. When the vehicle travels to the direction specified by the goods, slowly step on the clutch, and then step on the brake to stop. Put it in neutral and slowly lower the fork to control the tilt lever to be flat, and put it back by stepping on the clutch.

6. Finally, drive the forklift to the parking position, step on the clutch to neutral, put the fork bar to the bottom, pull the handbrake and turn off the forklift.