Traditional Culture Encyclopedia - Traditional virtues - Punching method for gas stove pipeline

Punching method for gas stove pipeline

Gas stove is one of the commonly used cooking tools in family life, and its flushing method must be paid attention to, otherwise it may pose a serious threat to the safety of life and property. Commonly used gas stove pipe drilling methods are as follows:

1. Traditional drilling method: drill directly on the wall with electric drill. This method is suitable for hard materials such as brick walls and concrete walls. However, it should be noted that a suitable drill bit must be selected, and a drill bit that is too small or too large can not be used, otherwise it will cause unnecessary safety hazards.

2. Manual drilling method: in the case of small holes, manual drilling tools can be used for operation. Manual drilling tools are easier to control and safer to operate than electric drills.

3. Impact drilling method: impact electric drill is used to drill holes, which has fast drilling speed and is suitable for hard materials. But this method is noisy, so you need to wear anti-noise earplugs when using it.

4. Fixing fixture method: before drilling, fix the pipeline with a special fixing fixture to ensure that the pipeline will not tilt. This method is suitable for smaller holes.

5. Glue fixation method: If it is impossible to drill holes, consider fixing with glue. Glue the bracket of the gas stove to the wall or table. However, attention should be paid to choosing the right glue and using it in strict accordance with the instructions.

Before drilling the gas stove pipeline, be sure to understand the specifications and installation requirements of the local gas pipeline, and ask professional gas installers to operate it to ensure safe use.