Method for manufacturing manual stool

1. Clean three milk powder cans and put them in the sun or blow dry with a hair dryer.

2. Glue three milk powder cans together with adhesive tape or hot melt adhesive.

3. Put the milk powder can on the cardboard shell, cut it off and make two pieces from top to bottom.

4. Then stick the top and bottom together with hot melt adhesive.

5. Milk powder cans are also wrapped in hard paper shells and glued together with hot melt adhesive. If there is tape, just wrap it outside.

6. The package effect.

7. Draw a pattern on the cloth according to the appearance of the cardboard shell, about 2 cm more, as a seam.

8. Cut two pieces around the milk powder can and the cloth needed for one week.

9. Prepare some wide lace and sew lace pleats for later use.

10, take out the upper piece and the long cloth, put the front side and the front side together, put lace in the middle, sew the three pieces together, and use the sewing machine to reduce the force.

1 1, sew the upper piece for one week, sew both sides of the lower piece, and do not sew the side edges.

12, leave the inverted mouth, which can be larger and should be covered on the milk powder can.

13, turn the cloth over from the back, the milk powder in the cloth is OK, and put a piece of silk floss on it.

14. Just sew it backwards at last. Tibetan stitch is the best and more beautiful.