The Six Root Solutions of Kongmingsuo

1. First, put six Kongmingsuo neatly on the table. .

2. Pick up the corresponding Kong Mingsuo as shown in the figure below. .

3. As shown in the figure below, pass through two kongmingsuo. .

4. As shown in the figure below, rotate the assembled lock as shown in the figure, and then take out the third Kongming lock corresponding to the picture. .

5. Then according to the figure, turn from vertical to horizontal and insert from bottom to inside. .

6. Insert as shown below. If they are the same, the operation is correct. .

7. Then, as shown in the figure below, take out the corresponding fourth Kong Mingsuo. .

8. Turn from vertical to horizontal and insert from above. .

9. After insertion, as shown in the figure below, the operation is correct. .

10. Then, as shown in the figure below, take out the corresponding fifth Kongming lock. .

1 1. Turn the fifth kongming lock inward and stick it together as shown. .

12. After installation, tap inward to expose the square hole. .

13. Then take the last Kong Mingsuo. .

14. Finally, just insert the sixth hole into the square hole. .