Traditional Culture Encyclopedia - Lucky day inquiry - What material is better for the height dimension of cowshed and railing?

Specification of the trough: the upper part is 60-80cm wide, the bottom is 35-40cm wide, the depth is 35-40cm, the inner

What material is better for the height dimension of cowshed and railing?

Specification of the trough: the upper part is 60-80cm wide, the bottom is 35-40cm wide, the depth is 35-40cm, the inner

What material is better for the height dimension of cowshed and railing?

Specification of the trough: the upper part is 60-80cm wide, the bottom is 35-40cm wide, the depth is 35-40cm, the inner edge is 35cm high, the outer edge is 60cm high, and the bottom of the trough is about 20-30cm from the ground. Water tank: width 60 cm, depth 40 cm, height 70 cm, bottom 40 cm off the ground. Railings: height 1- 1.5m, cowshed spacing1.1-1.2m. ..

I. Height dimensions of cowshed and railing

1, Niucao

(1) Generally, the upper part of the tank is 60-80cm wide, the bottom is 35-40cm wide and the depth is 35-40cm. The end near the cowshed is 35 cm high and the end near the aisle is about 60 cm high. The bottom of the tank is about 20-30cm from the ground. The groove should be designed as an arc and keep a small slope.

(2) The specifications of the sink are: width of about 60cm, depth of about 40cm, height of less than 70cm, and the bottom of the sink is about 40cm from the ground.

(3) If it is a high trough, the cow's hoof can't step into the trough, but when the cow eats forage, it is easy to arch the forage out of the trough; If it is a low trough, the cow's hoof is easy to step into the trough, but feeding is labor-saving; If it is grooveless, it is easy to clean and put forage, but it needs to be equipped with a water dispenser, which is relatively expensive.

2. Railing

The common specification of cowshed is 2. 1m? 1.8m,2.4m? 1.8m,2.2m? 1.8m, 1.6m? 1.8m, the height of cattle railing is between 1- 1.5m, and the interval is about1.1-1.2m. At the same time, the head height and tail height are guaranteed to be on the ground, which is beneficial to rumination and sewage discharge.

2. What materials are used for cow troughs and railings?

1, Niucao

(1) In ancient times, cow troughs were mostly made of wood and stone. Among them, the wooden cow trough is mainly hollowed out in the middle of the wood to hold water, forage and so on; The cow trough made of stone is mainly carved with large bluestone, and the price of this cow trough is also very expensive.

(2) At present, most cattle troughs are made of mixed cement, hollow bricks and other materials, and some of them are made of stainless steel and rubber skin.

2. Railing

Generally, galvanized pipes, hot-dip galvanized pipes, low-carbon steel pipes and other materials are used to make cow railings.

Three, cattle bed specifications

1, specifications: fattening cattle are generally 1.6- 1.8m, adult cattle are generally 1.8- 1.9m, and their widths are all1.1-/. ..

2. Concrete construction: cattle bed slope1.5-2%; Build a cow bed behind the feeding trough, and design a toilet drain and sewage drain with a width of 0.3m and a depth of 0. 15-0.2m behind the cow bed.