How to remove Jetta vs5 throttle?

There will be a plug next to the throttle of Pacific Auto Network, which needs to be unplugged before removing the throttle. After removing the plug, the next step is to remove the throttle. The throttle valve is usually fixed with four screws. First, remove the following two screws which are difficult to disassemble, and loosen the four screws. Then, you can remove the screw by hand. After removing the four screws, the throttle valve can be removed.

Volkswagen's new Jetta throttle is between the air filter and the cylinder block. The throttle valve is slightly cylindrical, and there is a disk rotating around the axis in the center of the cylinder. With the rotation of the disc, the cross section of air circulation in the cylinder will be controlled, thus controlling the flow of mixed gas.

There will be a plug next to the throttle, which needs to be unplugged before removing the throttle. For vehicles that don't unplug often, the plug may be tight and difficult to unplug. At this time, you can pry it around the plug with the help of a small screwdriver, and it will be easy to remove it after the whole is loose.

After removing the plug, the next step is to remove the throttle. The throttle is generally fixed with four screws, and the upper two screws are easier to remove. It is recommended to remove the lower two screws first, which are difficult to remove. Here, it is more convenient to loosen the screws with tools and then remove them by hand, but be careful that the screws fall into the engine room.

After removing the four screws, you can remove the throttle, and the exposed pipeline is the air inlet.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)