Motorists talk about the inflexibility of GT-R engine throttle and its solution

The throttle opening and closing of GT-R engine is not flexible, so it can not guarantee to provide the engine with the quantitative mixture needed for actual operation. The pedal linkage mechanism is loose, which is a poor opening and closing of the throttle valve. The reason for the looseness of the accelerator pedal linkage mechanism is that the length of the soft wire rope that affects the opening and closing of the accelerator door is improperly adjusted. When you step on the accelerator pedal, the engine speed can't go up, or the engine can't generate enough power without stepping on the accelerator pedal, and so on. Most of them are caused by insufficient tension of wire rope. The solution of this fault: 1. Unscrew the fixing bolts and nuts of the air filter, open the filter cover and take out the filter, so that you can clearly see the opening and closing of the air valve driven by the steel wire rope. 2. If the bending amount of the wire rope is extremely small, it means that the wire rope is very tight. Even if the driver releases the accelerator pedal, the throttle cannot be completely closed, resulting in excessive fuel supply and extremely high waiting speed. 3. There is another inspection method, that is, step on the accelerator pedal, and then see if the throttle can be in a vertical position, that is, fully open, to judge the fault.