How to remove and replace the ceiling lamp in the bathroom

The removal and replacement methods of the bathroom ceiling lamp are as follows:

Tools/raw materials: screwdriver, vice, ceiling lamp and accessories, etc.

Methods/steps:

1. Turn off the household power supply before starting the disassembly work.

2. Remove several aluminum gussets around the lamp with suction cups. Be careful when disassembling to avoid excessive force and deformation.

3. Observe the fixation of lamps and lanterns. Generally, it is fixed with two spring pieces. You need to grasp the borders on both sides of the lamp with both hands, pull it down with one hand and hold the lamp with the other hand, and you can take it off.

After all the lamps on the ceiling are removed, you can see the exposed wires on it. At this time, it is necessary to deal with the wiring to avoid the danger of electric shock.

5. Replace the new lamp, connect the live wire to L of the rectifier, and connect the zero wire to N of the rectifier.

6. After the wiring is completed, paste the metal contact part slightly with insulating tape and connect the panel to test whether it is installed correctly. Otherwise, it will be more troublesome to remove the top gusset plate if there is any installation problem.

7. Finally, install the pinch plate and turn on the light.