How to replace the drive belt of washing machine

The steps for replacing the driving belt of the washing machine are as follows:

1. First, lay the washing machine flat so that the bottom slide can be removed. If there are screws, remove them with a screwdriver. Remember the position of the original screw when disassembling. After removal, you can see the appearance of the base, as shown in the following figure;

2. It can be seen that the screw is fixed on the movable rod, and there is an identical back screw opposite this screw. First of all, fuck it.

3. Try to remove the damaged belt. If you can't get it off, loosen another screw.

4. This method can adjust the belt and remove the belt by sliding.

5. Then replace the belt, and complete the belt replacement in this step.