The production and installation of embedded LCD TV background wall is imminent.

Hello, first have an idea, what shape to make it, and then start making it.

I want to make my own TV background wall. The specific process is as follows:

First, figure out what shape to make, then nail it on the wall to shape it, nail it into a rough shape, then nail it on the wood with gypsum board so that the shape will come out, and then paint it. It's the same as hanging a plaster roof in the room, except that it's on the wall.

Then make a TV background wall:

1, slotting Use a cutting machine to make a small slot on the back of the tile, taking care not to damage other parts of the tile.

2. Embedding copper wire, bending the copper wire into a small S hook and putting it into the groove.

3, fixed copper wire, copper wire and ceramic tile should be closed with special structural adhesive, so as to ensure that copper wire does not fall off.

4. At the same time, inject marble glue and structural glue into the back of the tile (marble glue is mixed with an appropriate amount of coagulant). After all, it is only fixed by copper wires.

5. Wall Tiles Stick the tiles on the upper wall, and screw the screws at the copper wire hook at the same time, just like hanging pictures.

6. After all the tiles such as putty are on the wall, be bored with child. This is similar to normal tile laying, and the workers are scraping putty for the inverted groove.

Next is the detailed process of making TV background wall:

1, a, determine the position.

Choosing the right location is the first step in choosing the location of TV wall. Any wall in the wrong position is not suitable for TV wall.

B, you should choose the appropriate distance according to the size of your pre-installed TV. Usually this distance is 3.5 to 4 times the diagonal length of the TV screen, but I want to teach you an easier way-sit on the sofa and straighten your arms. If your hand just covers the TV screen, it means the distance is right.

C. After determining the distance of the TV, it is also necessary to grasp the height of the TV suspension, which is usually flat (or slightly higher) with the eyes.

2. Ruggedness of TV wall Although LCD, plasma and LED TVs are thin, their weight is considerable. Therefore, we must pay attention to their firmness and stability during the construction of TV walls to prevent accidents after hanging large-size TVs.

3. The circuit transformation of TV wall in pipeline preset is a key project. If you don't know much about the circuit, it is recommended to ask a professional electrician to embed the wires for you.

In fact, there is no practical difference between embedded LCD and ordinary LCD. The main difference lies in the clothes rack and the TV background wall. You can make any style you want. The only difference is that a groove is reserved. The length and height of the groove should be one centimeter larger than that of the TV. For example, if your TV is 100X75 cm, then the finish surface of the groove should be 102X77 cm, and the depth should not be less than 20 cm.

As for the installation, it is even simpler. The common hook is to fix the hook on the wall and then hang the TV on the hook. The same is true for embedded hooks, that is, the hooks are fixed in the grooves. The embedded hook can be extended and contracted. After fixing, pull it out and hang it on the TV, and then push the TV to the background wall until it is flush with the background wall. The advantage of embedded LCD is that the TV and the background wall are on the same plane, rather than protruding as usual.

These are some methods, I hope they are useful to you.